I got kinda tired of not finding any decent all-in-one, USB programmers. They either all required FTDI breakouts, cables, or did not have programming AND reset buttons. So, I set out to learn how to design the perfect ESP-01 Programmer! I know there are some SIMILAR, but I think this design is one of a kind.
Here is the result, my first ever PCB. I used SMD components, because I like to keep things small, and for me soldering these is not a problem.
For those who know what they are doing with PCB and electronics design, I have not tested this, and my biggest question is the 12Mhz Oscillator. Can I use ANY passive or active crystal, or do I need a specific kind? Also, are there any other thing you would suggest changing, to make it cheaper, better, or more effective?
For those who are interested, OSHPark is quoting me @ $2.44 each for a small run, and $1.46 each for a medium run. Th parts are dirt cheap ~ $1.5 each, the crystal oscillator and LM2937IMP being the most expensive parts. That makes the cost of a group buy, which to get the medium run price would be 70, each of these could be kitted out for ~ $3! Way better than that Chinese crap! Not there yet, but just food for thought.
Thanks for looking guys!
Well, I already made changes! I decided I wanted to try and get a smaller and cheaper Linear Voltage Converter, the previous one was overkill, and I wanted to add headers for additional testing while plugged in to the USB port. Not entirely sure the headers are necessary, but it sure would ease programming the ESP-01, so it doesn't constantly need to be removed, and can be tested on the programmer and without removal from the USB port. 🙂 Just hook up to the IO ports, and voila! The redesign added two more caps for the voltage regulator, but I probably should have had some on the other one anyway. It also added a bit to size and added two pin headers.
I also placed my first PCB order for testing, and got the BOM ordered. Looks like for 3 boards, my total cost per board is ~ $3.50.
After several revisions, and modifications, here is my ESP-01 Programmer! I have not tested it yet, but everything should be perfect. I have a few being made.
https://oshpark.com/shared_projects/sf3dkrea




