Dumb Led-Triks Disp...
 
Notifications
Clear all

Dumb Led-Triks Display

87 Posts
18 Users
0 Reactions
34 K Views
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Thanks, Matt!


Reply
tstraub
Posts: 525
(@tstraub)
Honorable Member
Joined: 18 years ago

Re: How i did: Dumb RGB Pixel Grid

If I am reading the MIB15027 datasheet correctly its good for 90ma/channel.


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

I’m right there with you. I’ve had several tubes of ‘595’s and a box of PN2222A’s sitting for a couple of years just waiting for something to do. I even have these in surface mount too, just in case you decide that we need to light up our shirts.

I like the simplicity of this also. I think the simple newbie type projects have been lacking for awhile. We need a few low level designs like this that beginners can understand.

I wonder if there’s a way that this can be done without the need for a PIC. I still think there are people that are lurkers because even programming a micro is a mystery.


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
ErnieHorning wrote:I’m right there with you. I’ve had several tubes of ‘595’s and a box of PN2222A’s sitting for a couple of years just waiting for something to do. I even have these in surface mount too, just in case you decide that we need to light up our shirts.

I like the simplicity of this also. I think the simple newbie type projects have been lacking for awhile. We need a few low level designs like this that beginners can understand.

I wonder if there’s a way that this can be done without the need for a PIC. I still think there are people that are lurkers because even programming a micro is a mystery.

You probably could do it just inside Vixen, but it'd be awfully painful to paint the pixels just right. I'm kind of leaning toward the 595 and a transistor instead of the ULN2803A, although I think for a test bench, a ready-to-run 595 ought to do the trick. I'm thinking of driving this whole thing using the stock Renard protocol and anybody using Renard ought to have a programmer. But pre-programmed PICs would be easy to do because it would be flashed with the display code, not the message. The message is buried inside the sequence in the pixels. I'm envisioning the code in my head (a VERY dangerous place for ANYTHING to be...) and thinking that implementing the output side first and the plugin later as the better way to go. It's not hard to envision the pixels in Vixen's screen -- if you set the column and row percentages so the pixels were square, just think of row 1 being blank except for control signals and rows 2-8 colored in to simulate letters. The plugin would take the text and color the pixels for you starting at a designated time or, you could just color them in manually if you like and make your own characters, smiley faces, whatever... Once you had your characters or words defined, you could just copy/paste them as needed. Any 8 channels could be used.

Oh well, more random thoughts.... but it's starting to gel (the idea, I hope... not my brain...)


Reply
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago
ErnieHorning wrote:I wonder if there’s a way that this can be done without the need for a PIC. I still think there are people that are lurkers because even programming a micro is a mystery.

If the lights are dumb LEDs and they are multiplexed, there would need to be something in there to cycle through all the rows. A free-running counter/decoder that enables the parallel outputs from shift registers could work, though. Then Vixen would just need to initially shift in the data.

don


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
djulien wrote:If the lights are dumb LEDs and they are multiplexed, there would need to be something in there to cycle through all the rows. A free-running counter/decoder that enables the parallel outputs from shift registers could work, though. Then Vixen would just need to initially shift in the data.

don

Yep, that's the general idea of what the PIC would do, along with "looking for" the start/stop characters that define the "load" operation. The "run" operation would start immediately after the load finished and repeat continuously so there's no need for a an unique "run" command.


Reply
dlovely
Posts: 3167
(@dlovely)
Famed Member
Joined: 17 years ago

Re: How i did: Dumb RGB Pixel Grid

I would add a vote for the 595 and 2N2222's. I have a stock of over 100 595's and hundreds of MPS2222AG's I plan to use to drive my large clock. Would be interested in seeing where this goes. Maybe add a RTC for countdown/time? LOL. Once I get some work done on the clock I will start a thread with some info on it. Mostly just lots of test parts as of now. Currently using the SX28 but want to switch to a PIC when I have some free time.


Reply
chelmuth
Posts: 1077
(@chelmuth)
Noble Member
Joined: 16 years ago

I know you're idea is to me very inexpensive and I love that. But how easily adaptable could it be made to drive larger things. Like I'm thinking instead of just 5mm LED's a matrix of C9's I have about a bazillion around here.. Maybe eventually upgrade to LED Retro C9's. Currently my plan is that I have a large grid build out of 3 Renard 24SS's. 8x9 and I have the channels organized so I can read what I'm writing as far as sequencing and I just scroll if over one channel at a time and make the words.. See attachments.. Scrolling words is fairly easy but having a "frame" maker / matrix addin would make creating images much easier..

preview
sequence

Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
chelmuth wrote:I know you're idea is to me very inexpensive and I love that. But how easily adaptable could it be made to drive larger things. Like I'm thinking instead of just 5mm LED's a matrix of C9's I have about a bazillion around here.. Maybe eventually upgrade to LED Retro C9's. Currently my plan is that I have a large grid build out of 3 Renard 24SS's. 8x9 and I have the channels organized so I can read what I'm writing as far as sequencing and I just scroll if over one channel at a time and make the words.. See attachments.. Scrolling words is fairly easy but having a "frame" maker / matrix addin would make creating images much easier..

A 595 chip with a transistor (or a 595 with a ULN2803A + support power) can easily drive an SSR, which could then control multiple 1000 watt spotlights if you had enough power to make all that happen. So the idea can be expanded into something large enough where you'd need a stadium-sized venue for your display. The practicality in driving smaller LEDs is total available current consumption, money and, of course, available space. I see the limitation only in terms of $$$ and vision.

As far as Vixen goes, remember that all a colored pixel on the screen does is turn on a light. If you color-in multiple pixels on the same line, it turns that light on and keeps it on until the pixels are no longer colored in. If you organize your channels into vertical columns of lights, you could accomplish the same thing with almost any controller. It would take a while to do because it would be hard to envision it in the Vixen screen, but it's certainly doable now. My plan is a variant in that it essentially uses only seven of a block of eight channels of those pixels as the "programming" for a moving message display and uses the eighth channel as the "load" and "run" button. This allows for a common, 5x7 pixel arrangement that is more-or-less the minimum required to outline letters, not unlike how a cheap dot-matrix printer formulates dots into letters on paper. So this concept is really a bare-bones idea, with not a lot of high-def in mind.

The concept could be expanded to a higher-def venue -- it's exactly what mrpackethead is currently doing with his wonderful pixel displays. So the availability of high-def display is already there and, unfortunately, the scope of high-def and more channels invariably means more $$$. I will leave the expanding of this idea to others since one of the major goals of this whole project is a 5-letter word: CHEAP. As Ernie Horning mentioned earlier in this thread, this is kind of a low-end, low-tech, low-cost project that could (should) be easily built by most anyone and a way to implement a moving message display for very little money. It will also (hopefully) be an understandable and meaningful project for beginners that requires few parts that also provides some soldering/electronics building experience, which can build confidence and skill for other, more complex projects.

There are plenty of opportunities to get into sophisticated DIY displays; this project is looking in the other direction because often, simpler can actually be better. 🙂


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

You may want to consider using a PIC16F627A (or one of its siblings) instead of the PIC16F688. It is capable of driving eight LEDs at the 25mA level by itself without external transistors. Both parts are capable of driving eight MOC3023-based SSR channels by themselves as well. The PIC16F627A is perhaps two bits more expensive, comes in an 18-pin package, and would require a fairly trivial port of the Renard firmware.

Oops, never mind, this is slightly off-topic. I was distracted...


Reply
Page 2 / 9
Share: