Notifications
Clear all
Development
11
Posts
4
Users
0
Reactions
6,388
Views
Mar 04, 2010 8:20 pm
cenote wrote:That's how I have it, just checking on the whole capacitor issue. Most "samples" schematics show that some sort of capacitor arrangement before and after Lm350'sAlways great advice form you folks down under, thanks
Chuck
Chuck
If you are using a simple switcher then a 317/350 as a cc then i would add a few hundred uF of filter cap as well as a bypass to the input of the LMxxx and have 25uF on the output to ensure stability.
The few hundred uF on the input is to dampen the ripple that is normal on switcher outputs when using data sheet design values.
Cheers and your welcome
Page 3 / 3
Prev
