The drawing is coming along slowly. I am doing it on new software and when I have spare time.
Thanks for all the feedback.
Development continues. I messed around last night and I feel it is coming along nicely. I tightened things up last night a bit on the control side of the board. Here is a screen capture for you to see.
looking good brian. I am toying around with a 14 channel SSR using 2 Cat5 cables. You would need to wire the ends differently or home etch the adapter but its a really compact design.
Ben
fkostyun wrote:I would say multiple RJ45's to maintain compatability with current designs. Other option is to also have a .100 header pin row for those who choose that method.
i would put both on. RJs for ease of testing and deployment, 0.1 header for flat cable configuration.
2x7 is an easy option at the SSR end, though you would still need a RJ/flat cable terminator at the Controller.
Macrosill wrote:Development continues. I messed around last night and I feel it is coming along nicely. I tightened things up last night a bit on the control side of the board. Here is a screen capture for you to see.
I see three RJ's, you are trying to maintain compatability with the current pinout? I think that's a better idea than an adapter... but, you could add jumpers and traces to make connection to the spares on two... then it could be made up at the controller so you would only need two Cat5 cables if you had the adapter.
Or... make the adapter a breakaway part of the SSR, and still give all the options... but, once again it's easy to be the person handing out the ideas.:rolleyes:
Jeff
Macrosill wrote:Development continues. I messed around last night and I feel it is coming along nicely. I tightened things up last night a bit on the control side of the board. Here is a screen capture for you to see.
Just an idea, rotate the RJ45s counter clockwise 90 deg so that they are facing the edge of the PCB. It will be difficult to get the plug to mate with the socket, due to the proximity of the 0.100 connector and the first RJ (from the left)
Also, the current limiting resistors can be either side of the Opto LED. Connecting them to Pin 1 of the opto will reduce the number of Vias, and allow you to beef up the +5V DC trace.
Brian
You may also be interested in the work i have been doing on a 16 channel SSR, i have described it all over at
http://diylightanimation.com/index.php?topic=170.0
Happy to post the same thread over here as well.
I have moved the RJ45's off the board and will be using an adapter PCB the can be plugged into the DB25 for backward compatibilty.
Ultimately a DMX plug in board will be done.
If you do go down the adapter road maybe we could have a single design that is populated with either 3 or 4 RJ45's as required. I have the design done - happy to add a pin header if you pass over the pinout.
Suprisingly the price differential is not much to do it as an adaptor and the flexiblity is greater.
Cheers
Phil
On a related note to this pcb design. We will need to find an enclosure to put these in. I have a source to have some plastic boxes made for this pcb. They can be customized to a point that the pcb just bolts in, with the entry/exit holes for the cables and a opening for the RJ45's.
If there is enough interest for these, I can send all the pcb info to get them made for all that would want to use them.
I'm also going to have some made for the Simple IO 12 channel SSR bards I have. If any of you have these and would like a custom enclosure such as descibed above, let me know, I can add them into my order.
To start of on the suggestions, the RJ45s will be verticle mount, like the ren-64 not horizontal as you see in the pic. There is no vert. rj45 in the library but the pads are the same.
I have 3 RJ45s there to follow the current ssr standard pinout.
The extra vias by the opto led resistor was because the opto pads were top layer only, I had to fix the pad properties for all layers. No more vias.
