Dancing Lights - GE...
 
Notifications
Clear all

Dancing Lights - GETTING STARTED....

61 Posts
14 Users
0 Reactions
20.8 K Views
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago

That was good info also.

Do I really need to be concerned with Cross Fading? What will happen to my program or how will it act without using it?

Also, what am I looking for to determine how to run lights in an all on state while my program isn't running - was it called a background sequence?


Reply
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago

Oh, here's another part of the show that, I guess is outside of the scope of building the board and creating the sequences/program with Vixen. I will be playing the music and not using an FM transmitter. What I experimented with, and it seems to work, is to use a small guitar amplifier (10 Watt) attached to my computer's speaker/headphone jack. From the adapter at the computer, I would use a standard guitar cable, but I'm not sure if this would stand up to the weather for several weeks or if it would even work in the cold at all. Would the amplifier function in the cold?

Also, I would like to enclose the amplifier in something weatherproof, but don't know what to use. I was thinking some sort of Rubbermaid container, but was wondering if there were other types of plastic or metal enclosures out there that would better suit this purpose. Simply put, I need something to protect the amplifier but allow the sounds of the season to project.

Like I said, I know this is a bit off topic, but any thoughts, tips with regard to sound projection?


Reply
kmc123
Posts: 824
(@kmc123)
Prominent Member
Joined: 19 years ago

Will your neighbors be cool with that?
Mine would NOT 🙂
An added benefit to the transmitter is that the viewers dont all have to get right up front and center, they can stay in their cars and stay warm / spread out.


Reply
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago

They would be cool with it because I won't be playing it too, too loud or too often (twice/night).

Another reason I don't want to get mixed up in the FM transmitter is that I don't have much experience with electronics and that would just be another added piece. I'm more worried about actually getting the controller built - scared actually.

Also, my display isn't too huge as present to cause big car traffic, however that may change in the future! 😀

Cool Site Too! I hope I can get there someday. It looks like you know what you are doing! How long does would it take you to build a Ren 24 or any other controller for that matter?


Reply
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago

Also, regarding extension chords again, I'm not sure if the controller will be inside or enclosed outside, but should I be looking for heavy duty extension chords to be hacked and used as the power leads coming from the board? Or should I just look for the indoor/outdoor variety for this purpose?

I see some that have the cubed receptacle ends that can take 3-4 plugs, but I was thinking I just want single receptacle ends for the power leads. I guess that really doesn't matter much if I only use one on cubed end.

Sorry if I'm being repetitive, but my head is spinning and I'm just eager to get started!!

😆


Reply
Posts: 163
(@scharbon)
Estimable Member
Joined: 19 years ago

As to cross-fading, no it is not necessary. I will rewrite that portion of the wiki to make that clear. If you don't want it - keep it set at zero. It just means that when one song ends, the next song will begin. That is how mine are set up.

Steve


Reply
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago

Now I'm confused. I have several songs that I want to put in a program. I would expect that when a song ends, the next song in the program will begin. Does the cross-fade have to do simply with transitional effect from song to song?

I guess when my controller is built I'll be better suited to see the different, available functionality.


Reply
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago

Here's another question(s) regarding the Ren 24:

Yes, it has 24 channels to controll 24 different sets of lights. and you you can string more then one string of lights on the same channel.. just dont go over 1A per channel (most mini light 100 ct strings are about .3A)

In the Deals forum, it was pointed out that on the Ren 24 board images, it says that a heat sink is required for >= 2Amp/channel not to exceed 6 Amp. Based on the quote above, can I assume the Ren 25 board I will be attempting to build sometime in March does not have a heat sink?

My display is fairly small so I should be able to use the 1amp/channel rule, but I'm wondering, if in a bind, can I squeeze a bit more on a channel? I guess I should ask that if the 1Amp is exceeded, will the channel burn or the whole board?

Like I said, I will stick to the 1Amp/channel rule, but just want to know my limits and consequences for exceeding those limits.

Thanks for all the great help!


Reply
Posts: 163
(@scharbon)
Estimable Member
Joined: 19 years ago

Yes, cross-fade is simply a transitional effect from one song to the next. You are correct, if you put multiple songs in a program - as shown in the wiki - and set the cross-fade to 0. When song 1 ends, song 2 begins, when 2 ends, song 3 begins, ...

Cross-fade, if you choose to use it, just allows for an overlap. In the example shown in the wiki, where cross-fade is set to 4 seconds, that means that 4 seconds before song 1 ends, it begins to fade out. And as song 1 is fading out, song 2 begins to fade in. At the end of 4 seconds, song 1 has completely faded out - and ended, and song 2 has completely faded in and continues at normal volume until 4 seconds until it ends. I think you get the picture now.

I cannot answer about the heat sink on the Renard. I have never built one. Lacking any response, I would say, don't exceed 1 Amp.


Reply
kmc123
Posts: 824
(@kmc123)
Prominent Member
Joined: 19 years ago

I built the Ren 64's in about 3 hours (MOST OF THE TIME WAS THE LED'S!)
As far as the SSR's - I did those in batches of 8, and each batch of 8 took around an hour.
I haven't done the Ren 24's yet - that coop has not shipped yet.
The FM Transmitter is not a kit - you just buy it on eBay (You CAN do the ramsey kit, but it sounds like you would rather buy instead of build)
I hope that helps!


Reply
Page 5 / 7
Share: