Dancing Lights - GE...
 
Notifications
Clear all

Dancing Lights - GETTING STARTED....

61 Posts
14 Users
0 Reactions
20.8 K Views
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago

Would I still have to purchase flux or is the 'stuff' in the core of the solder sufficient?


Reply
Posts: 999
(@ppohlman)
Noble Member
Joined: 19 years ago

The rosin ('stuff' in the solder) is flux and should be sufficient for most applications.


Reply
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago

I guess once I receive and assemble the board, the only other things I will have to do to complete the controller is to deal with adding the actual connection to/for the computer and add the power extensions from the board, does that sound about right?

I see that a serial connection is discussed with regard to Renard. Is that the best/only way to go or can USB via convereter of some kind be used?

Also, is there a particular grade of extension chord I should look to chop to create the power leads coming from the board. I was thinking of buying a 50 ft chord, choping and adding ends. I wonder if that would be cost effective. ???


Reply
Posts: 163
(@scharbon)
Estimable Member
Joined: 19 years ago

Won't answer the specific Renard questions about the serial port as I am not knowledgeable about the Renard. As for the extension cords however....

Yes, once you build the SSRs, you will need to enclose them (protect them from the weather) and run 110V AC to and from them.

Some people have made enclosures that are as simple as zip lock bags - I myself do not subscribe to that philosophy - others have gone over the top with high end enclosures - I am too cheap for that. I just got water-tight tupperware containers and modified them to accept the SSRs, CAT 5 and power cords. Some people use 2 gang boxes from Home depot and build them that way.

Since you were asking about extension cords - I assume you are inclined to enclose the SSR in some container and run power out through pig-tails (similar to my tupperware concept). Buying a 50 foot extension cord, cutting it up and adding female and male ends would perhaps be one of the more expensive options. Go check out the prices for outdoor extension cord female ends. I cannot find one for less than $3 each. You would need to buy 4 of these for each SSR PCB so you are already looking at $12 minimum just to get started.

I bought 4 standard 6 foot indoor extension cords per SSR PCB for $1.17 each (16 guage - 2 strand), and made 1 18 inch male pigtail and 4 18 inch female pigtails. I used this to run the power to and from the PCB. While not the cheapest solution it was very convenient.

Others bought bulk outdoor SPT1 (16 or 18 gauge - 2 strands) and a bunch of indoor connectors (both male and female) and built their cables from scratch. I think this is cheaper than my method - but a little more inconvient (not much though). See the thread in the good deals forum for the sources of these components.

Other alternative would be to go to Light O Rama, they have 18 inch outdoor 16 guage - three strand female pigtails for sale for $16 for 8 plus shipping. That may be a way to go also.

It is SAFE to use indoor extension cords outside, especially in the manner described above, you just do not have the UV protection you would get from an outdoor extension cord (cords will deteriorate faster). But given these cords are exposed to the sun for about 6 weeks out of the year, I think you could reasonably expect 5 years or more from the indoor cords.

Steve


Reply
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago

Thanks for the info, tips, etc.

I don't know what this means with regard to your extension chord comments, but I believe, read that the Renard 24 board has onboard SSRs.


Reply
Posts: 163
(@scharbon)
Estimable Member
Joined: 19 years ago

That means you would still need to run some type of altered or fabriacted extension cord from the Ren24. Same economics exist. Indoor cord is cheaper, making your own, more so.


Reply
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago

Here are some more questions that came to mind on my way home from work last night....

Let's say I do get the controller built, fingers crossed hard, and I get a few sequences built/set to music.... how do I string the sequences together in Vixen to comprise a full show?

Also, let's say my show is 20, 30, 40 minutes, whatever.... after the show is over, how can I set certain channels or all of my lights to illuminate continuously with no effects until the next show time?

Thanks all for the help so far!


Reply
Posts: 163
(@scharbon)
Estimable Member
Joined: 19 years ago

Since you are not too familiar with Vixen, you may want to view/review the videos at the following wiki location.

http://doityourselfchristmas.com/wiki/index.php?title=Vixen_How-To%27s

Looking through the list, I am not sure if xmus made a video for creating a program, but if so, it would be in step 10 or step 16.

But the general answer is: Sequence your songs, close your sequences, go to Manage/Programs, build a program of the songs you have sequenced (add the songs to the program in the order you want them played). Save and close the program. Go to Manage/Scheduler, select the time you want a program to begin, select the program you want. Set up the properties you want on the schedule, save and close the schedule.

As to running lights without music when your show is not running, you are asking about a background sequence. You do that by writing a script sequence (I have zero idea on how to do that) and setting it as your background. One of the smart people on this forum can help you with the background sequence - I wouldn't worry about it until October. You'll have plenty to do until then I am sure.

Steve


Reply
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago

I did view the videos, but your response gave some good information.

Thanks!


Reply
Posts: 163
(@scharbon)
Estimable Member
Joined: 19 years ago

Superfreak. I think the wiki entry at the URL below answers one of your questions - How to make a program. I have a little time and will make another one on how to make a schedule in a little bit. I will make another post in the wiki when it is complete. This is about as clear as I can make it right now without more input from you or other newbies. Let me know if you have a question on making a program.

All others,
I would appreciate any feedback on content to make sure I am not putting something out there that does not help you guys. My intent is to make a few more. Goal woudl be to make a Vixen users manual on the wiki (more or less). Thanks

http://doityourselfchristmas.com/wiki/index.php?title=How_to_make_a_program:

Steve


Reply
Page 4 / 7
Share: