Take a look at this found in the Wiki:
Can anyone give a ball park figure on building the controller?
The wiki has this information.
http://doityourselfchristmas.com/wiki/index.php?title=Comparison_of_DIY_Boards
Superfreak3 wrote:Can anyone give a ball park figure on building the controller?
My opinion, starting small a Renard 24 might be a good choice, 24 channels, self contained, just power cords coming out. This would control 24 sets of independent lights.
Then, looking at the comparison list, can I assume that building the controller with the Renard 24 board would cost approximately $55-65? Or is that for the board or simply the price of the other parts?
Also, is there someone from which I can buy all the parts?
Oh and I see from the comparison that The Grinch construction is listed as easy. What's the difference from the Ren24?
Then, looking at the comparison list, can I assume that building the controller with the Renard 24 board would cost approximately $55-65?
Yes. $55-$65 for everything.
Also, is there someone from which I can buy all the parts?
Sometimes people will put together a parts coop, but that usually takes a while to get all the parts (although it may be a little bit cheaper). Usually people get their parts through online distributors (as I mentioned above).
The Grinch construction is listed as easy. What's the difference from the Ren24?
The Grinch is easier to build, but you dont have dimming capability (if desired) and you'll need to build separate SSR boards. The Ren24 has those already on the board. Each SSR connects to the Grinch by a Cat5 cable and controls 4 channels. One thing that makes the Ren24 a little more difficult is that you'll need to program PICs (Programmable Integrated Circuits) to be able to run the controller.
Come by the chat room and you can get your answers a little faster.
One thing that makes the Ren24 a little more difficult is that you'll need to program PICs (Programmable Integrated Circuits) to be able to run the controller.
And how difficult is this to accomplish?
Superfreak3 wrote:One thing that makes the Ren24 a little more difficult is that you'll need to program PICs (Programmable Integrated Circuits) to be able to run the controller.
And how difficult is this to accomplish?
There's a few people in the forum who if you ask very nicely, they will probably do it for you. Otherwise, you'll need to purchase a pic programmer and do it yourself with the code provided
Here's my plan for right now.... Contact my bud to see if he can help to construct the board. If so, I will take the spreadsheet provided yesterday and buy all the parts and have him help out.
Once the board is constructed, I can then worry about the computer connections, enclosure, etc.
Ok, I see I can order most of the parts from Mouser, but how can I get the Renard 24 through COOP. Do I have to wait a while for that?
Let me know.
Thanks!
The Renard24 coop is forming now, estimated cutoff date will be around 1 March. This is the link to that post:
http://www.doityourselfchristmas.com/forum/viewtopic.php?t=1933
