TSL
@tsl
Reputable Member
Joined: Jan 14, 2017
Topics: 1 / Replies: 343
Reply
RE: Additional Controllers?

There is the expansion board for the Falcon to control differential recievers which can be, if I remember correctly, up to 250’ away from the f16. You...

6 years ago
Reply
RE: Street Light Help

Pellet gun...Seriously though....contact you local street department to see if they’ll do anything for you.Sent from my iPhone using Tapatalk

6 years ago
Forum
Reply
RE: Snow Machine Outside

Sorry can’t help you. Mother Nature is my snow machine. Sometimes she’s works good. Sometimes not so good and other times too good.[emoji3]Sent from m...

6 years ago
Reply
RE: Espixelstick help

PMJR778 wrote:I just wanted to say thank you to everyone for their input. Turns out it was my own lack of knowledge that was the issue. I thought that...

6 years ago
Reply
RE: DIY or Ready-To-Run

angus40 wrote:The Falcon ,HinksPix and e682 controllers are the best available for this hobby . I do not have a Falcon but it is common knowledge they...

6 years ago
Forum
Reply
RE: Buy or Make Own Cables

What Tom said here too!Sent from my iPhone using Tapatalk

6 years ago
Reply
RE: Power Injection - what to do with my setup

You won’t need 80%. Chances are 25-30% will be fine. Try it first to see if you need to inject. It won’t hurt anything. You can inject from the ends. ...

6 years ago
Reply
RE: Newbie in need of help

Did you change the number of pixels in the controller? Default is usually 50.Sent from my iPhone using Tapatalk

6 years ago
Forum
Reply
RE: Design Priorities

Adding a new item every year....beyond creating the new item, you will need to redo all the songs you have in the show. Creating and adding the item i...

6 years ago
Forum
Reply
RE: spacing for first layout

At that distance 3” should be fine. Usually the closer the distance the closer the spacing.Sent from my iPhone using Tapatalk

6 years ago
Forum
Reply
RE: WELCOME!!!!!!!

IzzyEddy wrote:Hello All, Dean from Tecumseh, ON Canada here. Looking for information and advice / help on how to move forward with my transition fr...

6 years ago
Reply
RE: pixel spacing on pvc

I use 2” spacing and cut them and add x connect connectors to the ends so I can connect and disconnect the 10’ sections for storage. I throw the extra...

6 years ago
Reply
RE: Display elements

Also, depending on the distance between the arches you may need a null pixel or f-amp in line.Sent from my iPhone using Tapatalk

6 years ago
Reply
RE: Window, Door, Garage Outline

Exactly. When drilling the pvc I made a jig to drill the holes at 2” spacing on my drill press. I drilled 1/2” holes and the pixels slide right in. Th...

6 years ago
Reply
RE: Window, Door, Garage Outline

I drill a hole through the PVC and slide the whole pixel in so h Just the end is sticking out the front of the pipe.Sent from my iPad using Tapatalk

6 years ago
Page 3 / 23