Display elements
 
Notifications
Clear all

Display elements

4 Posts
4 Users
0 Reactions
1,666 Views
Posts: 79
Topic starter
(@tomas041857)
Estimable Member
Joined: 8 years ago
[#53946]

I am not sure where to post this so I started here. But I was just curious if you can daisy chain display elements?
Thanks for any help.


3 Replies
TomL8345
Posts: 1356
(@toml8345)
Noble Member
Joined: 15 years ago

You can daisy chain pixel display elements up to the limit of your controller's output. You will need to do Power Injection for this to work.


Reply
mikeh65
Posts: 794
(@mikeh65)
Prominent Member
Joined: 19 years ago

Yes. Example, in my display I have a total of 8 arches, 56 pixels each and 8 mini trees, 128 pixels each. From the controller I am using four connections. On each connection I connect two arches and two trees, the trees sit under each arch. The daisy-chain goes arch 1, arch 2, tree 2, tree 1. I voltage inject at the beginning of each tree. So I am injecting just about every 100 pixels. 112 - arches, 128 tree, 128 tree. Four display elements, daisy-chained with voltage injection.

Does this make sense?


Reply
Posts: 344
 TSL
(@tsl)
Reputable Member
Joined: 10 years ago

Also, depending on the distance between the arches you may need a null pixel or f-amp in line.

Sent from my iPhone using Tapatalk


Reply
Share: