That should be it. The DMX controller for the Pi was set to 255 outputs in Vixen, but 100 outputs in FPP. The megatree controllers were added after th...
Thank you sir. I glanced at it last night but nothing was obvious. I will map it out tonight and see what I find.
I started by going into the preview setup and increasing the string count to 20. I increased the pixel count to 150 per string. I saw the extra ones w...
I see what it was causing the proble now. I had to give the tree a different name. Vixen was still tracking it by the original name even after unpatch...
I got it to work. I don't recall now what I did as I was trying so many things. I know once I got back into the preview screen and there were no pixel...
Just completley deleted the tree and re-entered everything in case the conversion from the old tree was causing a problem. Still won't send any data t...
I am making the move to Xlights this year. I can already see 2 major advantages from setting up compared to using Vixen 3. 1) The ability to use null ...
You won't be happy unless you get high capacity port contollers like mentioned above. I added a 5th Sans E682 this year for the upgrade of my biggest ...
Happy to say this proceedure still works. Built a E682 today and was able to flash 5 on it.
Happy to report straightening pin 8 on the NIC jack fixed the problem. Crossing my fingers.
There are direct firmware download links on Jim's site. Is this something special he would have to create for you?
