Activity
 
Notifications
Clear all
TheLost
TheLost
@thelost
Estimable Member
Joined: Nov 2, 2016
Topics: 18 / Replies: 171
Reply
RE: LIFX (smart lights/bulbs) E1.31 Controller Project

critic2 wrote:I would be interested. I think you will be happy with the brightness of these lamps. I'm highly impressed with the LIFX company so far...

9 years ago
Reply
RE: Need to show some team spirit. BR30 RGB Smart Bulbs for outside.. Sylvania Smart+?

Update!! Sylvania finally responded to my question about being used outdoors with a firm "we wouldn't suggest it" so I returned them to Amazon. I pr...

9 years ago
Forum
Reply
RE: RGB color values for incandescent white?

I thought I was the only crazy one trying to get my pixels to match my incandescents 🙂 I actually started a little project that used two TCS34725 co...

9 years ago
Forum
Reply
RE: Printer Bed Surface -- LokBuild

Just my $0.002 ... LokBuild (and Buildtak.. imho its mostly same stuff) work great but they get scratched, dinged and wear out quick. Granted its b...

9 years ago
Reply
RE: DIY: foam cutter advice

What are you going to cut? I prefer a 'bow' for the type of stuff i cut but some people prefer a table set up. You don't really need to use nichrom...

9 years ago
Reply
RE: Pixelstick and multiple elements

MikeKrebs wrote:These are real DIY so if you are ordering ones and twos, the cost and shipping will go up. If you want 25 or so, you can do them inexp...

9 years ago
Reply
RE: Pixelstick and multiple elements

mrGrumpy wrote:Last I saw the ESPixelsStick is selling only at amazon and about $20 - out of stock Renard Plus ESP WiFi Pixel from Renard Plus Shop is...

9 years ago
Reply
RE: Pixelstick and multiple elements

You should stick to around 640 pixels per stick (you can do more but your refresh rates will suffer). Its possible to do multiple elements of one 'st...

9 years ago
Reply
RE: PIC programmer wanted/recommendations

MartinMueller2003 wrote:Yes it does I don't think it does (or at least it didn't last time I looked). The standard 'real' Pickit3 just comes with t...

9 years ago
Forum
Reply
RE: PIC programmer wanted/recommendations

I'm curious where you guys find these 'real' pickit-2/3's so cheap? I'd say stick with cheap clones. Microchip published the schematics of the origi...

9 years ago
Forum
Reply
RE: 12VDC vs 5VDC WS2811 Pixels

davdue wrote:Do you generally use 20awg or 18awg pixels, or does it really matter as long as you inject every 100 pixels? I try to get 18awg on all ...

9 years ago
Reply
RE: Need to show some team spirit. BR30 RGB Smart Bulbs for outside.. Sylvania Smart+?

critic2 wrote:I haven't used the sylvania lamps but I do have the lifx and Philips hue. If you want bright, then lifx is for you. (The rhyme wasn't in...

9 years ago
Forum
Reply
RE: Need to show some team spirit. BR30 RGB Smart Bulbs for outside.. Sylvania Smart+?

MartinMueller2003 wrote:Why not replace the guts of the cans with the RobG floods in a down direction. Cost, Support & Reliability... I don't want ...

9 years ago
Forum
Page 2 / 13
Share: