Technician
@technician
Reputable Member
Joined: Mar 23, 2015
Topics: 5 / Replies: 361
Reply
RE: Cool Glow 25 Pack of 4" Premium Green Glow Sticks $5.99 + $5 shipping

With the little kids, I avoid giving out anything with button cells inside due to the danger of them being swollowed. The only exception are some tha...

11 years ago
Forum
Reply
RE: Low Voltage Controlled High Amp Relay

Cheap fog machines (usually small) don't have a remote, so it is not recommended to open them to wire onto the fog on switch as it may be 120VAC or lo...

11 years ago
Reply
RE: Low Voltage Controlled High Amp Relay

When high amperage power contractors pull in and release, they can cause voltage spikes that require snubbing. If you are using DMX to run a renard, ...

11 years ago
Reply
RE: How to calculate power needed

The specifications in the strips mentioned is using some rounding. I understand 20 Watts, but the other specification does not match watts, so it is m...

11 years ago
Reply
RE: Can pixel strips get any cheaper??

From the photo, they appear to be in the hollow tube with no gel to keep out water. They are also 3 LED's per IC, which is relatively normal for 12V ...

11 years ago
Forum
Reply
RE: Can pixel strips get any cheaper??

From the photo, they appear to be in the hollow tube with no gel to keep out water. They are also 3 LED's per IC, which is relatively normal for 12V ...

11 years ago
Forum
Reply
RE: Verifying my USB to RJ45 adapter

An easy way to check RS485 is to connect a pair of red LED's in parallel but back to back. Cathode to anode, anode to cathode, and the pair in series ...

11 years ago
Forum
Reply
RE: Pi b+ and USB hub

What is recommended and protects the Pi with no modification is to use a powered hub to power periferials that use lots of power. Low power items suc...

11 years ago
Reply
RE: Pixels wired in parallel....

A couple of points on splitting pixel data, Normally a Y connection in a data line is a huge no-no. However, there are exceptions. A Y with any lon...

11 years ago
Reply
RE: E682 Power Question

For some strings, I've hardwired the wall wart power supply for DJ type lighting. The wall wart powers 1 string. Only Ground and Data is fed from th...

11 years ago
Reply
RE: Configuring FPP - E1.31 Bridge and DMX-Universes

In place of the E682's I am using a DIY LED Express Bridge to drive pixels and DMX. I found excellent results with plugging everything into LAN ports...

11 years ago
Forum
DMX
Reply
RE: This has to be the Lamest attempt by idiot scammers I have ever seen.

Some baiting sites do a deliberate education of the scammers to make it more obvious to the victim, that the scammer is not competent. Helping them w...

11 years ago
Forum
Reply
RE: Uniform holes in Coro

If you have a projector and need different spacing than perfboard, or want smooth pixel curves, when making signs, I sometimes use a projector and pen...

11 years ago
Forum
Reply
RE: This has to be the Lamest attempt by idiot scammers I have ever seen.

Interesting replies. The honeypots for the tech support are numerous on Youtube and fun to watch. One call lasted about 6 hours. For others watchin...

11 years ago
Forum
Reply
RE: This has to be the Lamest attempt by idiot scammers I have ever seen.

Other than some of the material is not safe for work and kids, a quick way to get up to speed on the current active scams is to visit a scam bait site...

11 years ago
Forum
Page 8 / 25