E682 Power Question
 
Notifications
Clear all

E682 Power Question

24 Posts
7 Users
0 Reactions
6,750 Views
IaRoadKill
Posts: 586
(@iaroadkill)
Honorable Member
Joined: 12 years ago
covewi wrote:My matrix is 27 rows high X 50 pixels wide.

Was planning on 9 strings each having 3 stands of 50 (150 pixels per string)

Thought it would work out nice and even. Plugging 9 strings into 9 outputs. Doesn't look like this will work.
Can I still have this matrix configuration and break up the number of pixels in within a row?

If you don't think this will work can you offer up suggestions?

Iam totally new to this and can certainly use a little guidance.

Thanks

I don't know about breaking up pixels in the middle of a row I believe you could buy cutting the wires. Someone else will have to chime in on this.

I like running one string out and one string back. You can add power to the end easily that way. (Less wire.) All controllers and power supplies would be together.


Reply
Posts: 366
(@technician)
Reputable Member
Joined: 12 years ago

For some strings, I've hardwired the wall wart power supply for DJ type lighting. The wall wart powers 1 string. Only Ground and Data is fed from the controller. Works like a charm. Add a string? Not a problem. Mixing 5V and 12V pixels on the same string? Not a probllem. Each string is mated to the proper supply to run it. Only data needs to be run from string to string or controller to strings.

In an event tent or gym, it is often not difficult to find local power around the perimiter where the lights will be installed. Changing show size is easy this way. Even 12V battery power is possible on the bridge and wireless router if you use one if you want to do a Disney style parade and have everything sync.


Reply
Posts: 793
Topic starter
(@covewi)
Noble Member
Joined: 17 years ago

Thank you everyone. The matrix is coming along. Don't know if it will be ready by Halloween...but surely for Christmas.

IMG 8404

Reply
IaRoadKill
Posts: 586
(@iaroadkill)
Honorable Member
Joined: 12 years ago

Hey, that plastic matrix backing looks familiar to me…
Looking good!


Reply
Posts: 793
Topic starter
(@covewi)
Noble Member
Joined: 17 years ago
ArcadeNut wrote:You can power the pixels directly from a power supply and only send the data from the E682 as well just be sure to put inline fuses.

I will need to power the pixels directly - not through the e682 - it will just work out better this way.
So I only need to send Data - from the e683 (just one wire) - and then send the 12 volts and the GRND from the external power supplies to the pixels?
Does this sound correct?

Thanks


Reply
Page 2 / 5
Share: