Notifications
Clear all

E682 indicators

6 Posts
4 Users
0 Reactions
2,186 Views
Posts: 3735
Topic starter
(@algerdes)
Famed Member
Joined: 15 years ago
[#38334]

I have a E682 that seems to be working fine, except the red indicator light is out.

The manual states, "The red STATUS LED generally indicates that the web server is enabled and will be on during normal operation."

I'm actually logged into the web page for the card as I type this. I've also checked several (but not all) of the ports. Everything seems to be working.

All other indicators are on. All power levels are correct.

Should I be concerned? Is there an extra meaning to the red indicator light?


5 Replies
Posts: 1120
(@4586shaggy)
Noble Member
Joined: 14 years ago

Use your multimeter to check for voltage at the leads, it could just be a bad led.


Reply
jklingert
Posts: 1767
(@jklingert)
Noble Member
Joined: 16 years ago

Did it ever work? Maybe you installed the LED backwards?


Reply
Posts: 3735
Topic starter
(@algerdes)
Famed Member
Joined: 15 years ago

It did work. This E682 has been in the field for a year now.
All indications are that this one was "pre-built", not a kit (either that, or I'm a better solderer than I thought.)


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

Mine and others are very dim. Can only see it in the dark dimly flashing.


Reply
Page 1 / 2
Share: