Activity
 
Notifications
Clear all
Srmorgan
@srmorgan
Estimable Member
Joined: Mar 22, 2020
Topics: 15 / Replies: 79
Reply
RE: I have a question about PI from the rear.

I feel embarrassed that took me a little bit to figure out what you’re talking about. very funny

2 years ago
Forum
Reply
RE: I have a question about PI from the rear.

That is correct. I think there is about 270 pixels.I don’t remember the correct count but let’s say it’s 100 pixels. 1-33 is powered from the first po...

2 years ago
Forum
Topic
Forum
Replies: 7
Views: 5593
Reply
RE: Power Injection With Buck Converters

I understand fusing works off of amperage, but is there a way to in essence fuse the line after a buck converter in case it fails and the voltage jump...

3 years ago
Reply
RE: Kulp k4-pb not powering up

Small update. Two of the fuses were blown and I replaced those but the pocket beagle still won’t turn on.

3 years ago
Topic
Replies: 2
Views: 769
Reply
RE: Help Troubleshooting

Sounds like you need more power inj. on the pathway lights.

3 years ago
Reply
RE: Xlights --> FPP issue

One time it didn’t when because I didn’t click save after rendering the sequence. Are you using flights to upload the file?

4 years ago
Forum
Reply
RE: Pixels Staying Red

Is it possible for you to change the order that the windows are hooked up. Place the offending one first and a known good window last. If those last n...

5 years ago
Reply
RE: Could this damage the ESP 2811 or the logic level converter

Also where do you get the v4? I looked on forkineye and it only shows the version three

5 years ago
Reply
RE: Could this damage the ESP 2811 or the logic level converter

I won’t have both powered on at the same time just one. I use the falcon because I add about 5k more lights and props at Christmas and it’s run with a...

5 years ago
Reply
RE: Xlights model for drooping light strings?

Take a picture of the section that droops and import the picture to make a custom model. Then just click on the lights in the picture in order from fi...

5 years ago
Forum
Reply
RE: WLED and Pixel Layout

Oh yeah I forgot all about the level shifter I did have to use that to boost the signal up to 5 V or you do have to be right next to the ESP 32. I hav...

5 years ago
Page 1 / 7
Share: