Pixels Staying Red
 
Notifications
Clear all

Pixels Staying Red

22 Posts
5 Users
0 Reactions
3,783 Views
Posts: 242
Topic starter
(@rsegreto)
Reputable Member
Joined: 6 years ago

Doubling back here, I was finally able to test and there is 11.9 V coming through the PI line and 10 when the pixels are on. So it still doesn't seem to be the actual PI line or the PSU to me. I also moved my PI point to before my bedroom window outline and the same last 9 pixels were flickering and acting weird.

I'm just going to replace those 9 pixels and set the lights up the same way to see if anything changes next year.
thanks again,
-Russ


Reply
MartinMueller2003
Posts: 7612
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Only replace 2. Last working and first flickering


Reply
Posts: 242
Topic starter
(@rsegreto)
Reputable Member
Joined: 6 years ago

So replace the first one of the 9 that’s are acting up and the one upstream of you will?

I assumed that the first of the 9 was the culprit, so you replace the one upstream as a precaution in case that caused the failure in its neighbor?

Sent from my iPhone using Tapatalk


Reply
Posts: 94
(@srmorgan)
Estimable Member
Joined: 7 years ago

Is it possible for you to change the order that the windows are hooked up. Place the offending one first and a known good window last. If those last nine pixels on the offending window work then the last nine on a good window don’t work. it’s an xlights configuration problem and if everything after the offending window doesn’t work then it’s a hardware issue.


Reply
Posts: 242
Topic starter
(@rsegreto)
Reputable Member
Joined: 6 years ago

I’ve gone through xlights and testing through fpp both my myself and with help from the xlights zoom people. Pretty certain it’s not a software issue.

Plus if I remove the PI at the end of the offending window the pixels work correctly.

Sent from my iPhone using Tapatalk


Reply
Page 4 / 5
Share: