I dont have a circuit diagram in a suitable format for posting. Its the standard 595 configuration with the N-channel FETs driven directly from the ou...
It is ON/OFF the same as the original Olsen 595. All I have done is replace the SSRs with FETs and mounted them on the same board as the 595s. A Ren-C...
The PC running vixen stays on 24/7 everything else is off untill show time. Its usualy around 40 degrees celcius at Christmas time so I dont have to ...
The problem I have had with incandesent lights (apart from blown bulbs) is that after a few weeks in the sun they have faded and all turned clear. Wi...
Outstanding !! Well done
Although its not clear in this case I would be careful as a lot of these type of lights sold on ebay run on mains voltages that is 240V in Aus. Ther...
Great info piesrule. I purchased about 1500 lights last year for my mega tree and was very disapointed that by the end of christmas the paint had com...
do you use a profile? if so make sure you have copied the profile over correctly.
Good tute Greg but I have a silly question.... I noticed there is a 12v socket on the bottom of the Belkin why not use it with a cheap plug pack? Ro...
Thanks for the info. Looks like I may need to use a desktop pc if I want to run multiple LPT ports instead of the notebook. Rocket
I recently purchased a USB to parallel port adapter and its no good. XP doesnt assign a LPT port to it. It just shows up in device manager as USB prin...
I live in Australia and our power distribution is a little different to what you are using. If i understand correctly Ernie you say you are useing an...
Very good so the LED strobes are low voltage are they just standard LEDS being over driven??
How did you expose it was it with UV lights or in the sun? Im not sure if you had positive or negative resist board but if it was positive resist the...
