Yep there is either 1 or 2 arrows on each board the one pointing to the short end of the boad is the data path... the one pointing to the long end of ...
I have had some more inquiries on this... sequencing can be done in either xlights or vixen 3... both can do the matrix though if your running a hi...
there is my panel in action if thats what your talking about
the issue with the panel count is your looking at 2 controllers no matter which way you do it... the pi has a 36 panel max the bbb is 64 panel max t...
i posted a p10 help guide and it lists all the stuff you need to get one up and running
i trimmed the 2 nodes that stick out preventing my power supply holder from screwing in... i think i may take it off and use computer stand offs from ...
does the pi matrix board support them? it thought it does ... i know the octo wont
p10's can be less expensive per square foot as well... depending on the pixel density and open controllers available... if you want a small say 2 foot...
Just a quick followup on the post.... the raspberry pi matix adapter has 3 outputs and a max of 12 panels per output for a total of 36 panels the oct...
av_guru wrote:Thanks for the reply. The mac is the default from the manufacturer. I was not aware of the format you referenced. I am new to pixels a...
The offeset in the code is needed... the first 126 bytes of the packet are network routing info. Its the stuff necessary for the packet to be sent ove...
psalmx wrote:Thanks I'm not sure what I did but it started working on the uno. Only strange thing is pixel 1 seems to get stuck on red, it display al...
elnino wrote:That is my code, I'm glad it has helped you! I have tweaked it a little further and I also have an ENC28J60 (cheap ethernet) version of ...
