You can patch all 180 pixels in order but reverse patch pixels 61-120. Where you need to be is in the grouping. If you only want the bottom half to l...
WakeFan wrote:Thank you for the response. I'm open to anything and will check for sure. They are the SS series. I don't think it's a data issue be...
WakeFan wrote:Pic didn't go very well...its on page 24 of the e682 manual Sent from my SM-G950U using Tapatalk Okay. Not sure what Renard boards you...
wilmar wrote:I would normally agree but I’m laying .8mm layer and it’s pretty tough at this size . Has enough to flex and not crack I’ve been throwing...
The thing is spiral print only lays down 1 layer making it really thin and pliable. Sent from my SM-T710 using Tapatalk
Just checked your numbers against mine. Yours will work. I just used different pixels for my last 2 rows so you're okay.
So in your case I would do this. Pixels 7-8-15-16-23-24-31-32-39-40-47-48 Center group. Next row: 6-9-17-25-33-41. Next row: 5-14-22-30-38-46. Next ro...
davdue wrote:Ok. One more question. Do I have to change the pixels so they are starting at the center? No matter what I can't not skip holes on the...
This is how you need to set it up. Your pixel numbers will differ. The inside ring uses pixels 1-8-9-16-17-24-25-32-33-40-41-48. The next ring out use...
davdue wrote:Yes just a lot faster. I am doing it to the beat of God Rest Ye Merry Gentlemen. Here is a numbered picture of the snowflake from the b...
If you don't want that unused pixel to light just don't patch it. You will have an open controller output with nothing patched to it. The signal will ...
Is this what you're trying to accomplish.
Exactly why every other hole? Also, you did say the last pixel isn't used. Don't light it. Don't even patch it and it won't come on. These snow flakes...
Yes, repatch in the order they are in. Note, only do one section at a time. Don't do the whole snowflake. Patching may not patch in the correct order ...
You can inject power at the end of the first string and at the beginning of the 2nd string. You can do that with multiple strings and only have 1 data...
