Pixels and failures
 
Notifications
Clear all

Pixels and failures

5 Posts
4 Users
0 Reactions
1,297 Views
Posts: 36
Topic starter
(@mattchew1296)
Trusted Member
Joined: 7 years ago
[#53313]

I am having issues with my pixels that I got all setup. As per recommendations from the fourm and how to's, I have my components setup as follows.

5v ws2811 pixels controled by e682.
I am injecting power every 50 pixels with a 5v power supply close to the lights using 18awg wire.
The first 50 pixels are getting powered from the controller.

When I am running solid colors it seems to be fine, a even brightness across the board but I do get a random flicker sometimes. But when I switch to white I am having issues. They will go nice and white but will flash and flicker as if their wasn't enough juice. The first 50 changes color at the end but that's because it's getting supplied from the controller.

I am thinking that I should bypass the power from the controller and just supply it via the secondary power supply.

Would this solve my issues?


4 Replies
Posts: 120
(@superdave)
Estimable Member
Joined: 13 years ago

"Ever Wonder Why You Pixels Flicker and How to Fix It"


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

You can inject power at the end of the first string and at the beginning of the 2nd string. You can do that with multiple strings and only have 1 data line. Running full white is usually iffy no matter how much you inject. After my first year of running 100% output I switched to 25% output and never looked back. The colors are more pleasing and not all washed together in one big bloob. Much easier on the viewers eyes also because their eyes aren't drawn to one big bright object which takes away from other props.

Sent from my SM-T710 using Tapatalk


Reply
Posts: 113
(@cmndr-brain)
Estimable Member
Joined: 9 years ago

You never said how far away your first node is from the controller (at least I didn't get it from your original post). If you think your power injection is good, which it seems to be, you might have a data transmission problem. Possible f-amp or null pixel?


Reply
Posts: 36
Topic starter
(@mattchew1296)
Trusted Member
Joined: 7 years ago
Cmndr Brain wrote:You never said how far away your first node is from the controller (at least I didn't get it from your original post). If you think your power injection is good, which it seems to be, you might have a data transmission problem. Possible f-amp or null pixel?

I'd say the furthest one of my first nodes are from the controller would be about 25ft. I just built another setup and this time I used power only from a secondary supply and doubled up my wires for data and it seems to work no problem.

One thing I was wondering is should I do the resistor change for being further away from the controller? If so what should I change to.

Thanks all for your help


Reply
Share: