Do you have a prop plug? If so update the controller firmware. Sent from my SM-T710 using Tapatalk
Davor wrote:I plugged my computer directly into the E6804 and set a static IP on my computer and still can't reach the E6804's web server. I, however,...
wilmar wrote:Still can’t get channel 16 to work it’s stuck on for some reason Sent from my iPhone using Tapatalk I didn't know you had an issue. S...
Don't know what to tell you. Since you can't access either controller I have to assume it's network related and I'm not a network guru. Sent from my ...
Davor wrote:Still can't access it with just one 6804 connected to my network. If you can't access either one then it's a network issue. Highly unlikel...
Something going on in your network because you said you also can't access the second 6804. If the second 6804 is still connected, disconnect and see ...
Davor wrote:Yes, the IPs are different. I can ping both from my command prompt and receive a reply 0% packet loss. How do I do a reset? I forgot. You ...
Davor wrote:Yes. I only set the temporary IP as a troubleshooting step. I did that to eliminate the possibility that the original IP was conflicting w...
Davor wrote:My E6804 was working fine last night. Then tonight, the pixel strings on outputs 2,3,4 are not lighting and the string on output 1 is stuc...
davdue wrote:All my pixels are ran by ESPixelPop’s. The SS24 is running 12 channels of incandescent lights on my roof. I love the simplicity and chea...
Ironhawk wrote:Boy am I confused. I have spent the last several days trying to debug my show by running it from Vixen, but haven't been able to make a...
MartinMueller2003 wrote:Dont know if anyone in DIY is on this year. I had people ask why I do not put my name in. I prefer to avoid the drama and just...
I didn't watch last year because the shows they covered were ridiculously large and not worth watching. With this show the bigger it is the better it ...
jllracer55 wrote:I am curious to hear if there has ever been a version of the SS series boards where the serial pinouts were incorrect? Or has anyone ...
Ironhawk wrote:Hey MikeKrebs, my PC is 192.168.1.113 and the falcon is 192.168.1.50. Now if I can just get the PC to communicate that would be great. ...
