pmiller
pmiller
@pmiller
Famed Member
Joined: Jan 14, 2015
Topics: 180 / Replies: 2615
Reply
RE: E682 5.030 uneven zig zag commands going haywire

TomsLEDs wrote:The star is on a separate universe. Did you manually build the matrix in preview setup assigning the strings individually? That was goi...

5 years ago
Reply
RE: E682 5.030 uneven zig zag commands going haywire

TomsLEDs wrote:I am not having any luck setting up 5.030 to zig at the middle of a row when the previous strand ends and I start a new one. You can se...

5 years ago
Reply
RE: Pixel Tree Star Wiring

Let’s say you have a pixel tree with 16 strands of 50 pixels and a 90 pixel star. In Vixen make the tree and star like you would any prop. The catch i...

5 years ago
Reply
RE: Vixen and E682 Controller

Yes. The controller brightness is used.Sent from my iPad using Tapatalk

5 years ago
Forum
Reply
RE: finally back in christmas mode E682 firmware

intwoit wrote:I am trying to find the advantages of moving from version 4.x to version 5.x. Please let me know of any results either good or not so g...

5 years ago
Reply
RE: Using the Export Wizard on Vixen

You can also export a Universe file from vixen but you would have to access the root directory of FPP and upload it. It would then fill in FPP output ...

5 years ago
Forum
Reply
RE: Do I need to cut the tin off of controller pigtails?

Use wire ferrels and never worry about it.Sent from my iPad using Tapatalk

5 years ago
Reply
RE: Pixels on 1 Power Supply

Grab yourself a server supply that is 12 volt, 750 watts and 62.5 amps. They are cheap. Get a breakout board for 6 bucks at Parallelminer.com and you’...

5 years ago
Reply
RE: New to this need help.

Sounds to me like he’s using normal plug in lights. If that’s the case a Renard board is basically all he needs to turn them on and off. Sent from my ...

5 years ago
Forum
Reply
RE: Set pixel output percentage?

If you have a Sandevice controller you can set it there. Sent from my SM-T710 using Tapatalk

5 years ago
Reply
RE: FPP install help required

#1 - You export out of Vixen as a Falcon Player sequence 2.6+ and then upload the files to FPP. I think Vixen can export right to FPP but I can't say ...

5 years ago
Reply
RE: FPP install help required

bcer960 wrote:sorry for noob questions..... but what image? If i go into the FPP folder, there's "root.tar" "boot.tar" and another zipped folder "slid...

5 years ago
Reply
RE: FPP install help required

You do not copy your img file to the SD card. Use a program called balena etcher to install the image on the sd card. Sent from my SM-T710 using Tapa...

5 years ago
Reply
RE: colors not correct

angus40 wrote:What is the brightness level on this matrix ? Brightness ( try 50% less) , hue , saturation and contrast are setting I would suggest you...

6 years ago
Reply
RE: colors not correct

Just an idea but are you running at 100% brightness? If so the colors are too bright and everything will look like one big bloob. Try turning the brig...

6 years ago
Page 3 / 187