Thank-you pmiller for all your help, I think I have it all configured right, but can't test it. so, I am hoping I can ask a couple more questions.
1) how do I export a fseq file out of Vixen, it only wants to do a VPKG file
2) I have a RTC for the Pi, and think I need it, but do not know how to install or configure it. I am planning on having this Pi run a "Tune to" on my detached garage. I am not wanting this to be connected to the show network, but simply running it's own show on the matrix. in a loop over a set time period ( while the regular show is running). I think I need the RTC to keep the schedule working, am I correct in that?
3) in the videos I have watched ( older versions of FPP) they set up a USB stick in the FPP settings tab, but in this latest version, there is no setiings for a USB, have they hidden it somewhere, or do I not need to set that up?
Thanks again for your help.
#1 - You export out of Vixen as a Falcon Player sequence 2.6+ and then upload the files to FPP. I think Vixen can export right to FPP but I can't say for sure. Also in export there's a setting to Create a Universe file. That file is a .json file that when upload to FPP it sets up your channel outputs for you. Convenient when you use a lot of universes otherwise it's just as easy to set the channel outputs yourself.
#2 - I've never used RTC so can't help you there
#3 - You should really use the SD card for storing files. In FPP you need to expand the SD card to it's fullest capacity. FPP install instructions tell you how this is accomplished. I think I recall on newer FPP versions a window may pop up asking you if you want to expand but not sure. Use a 32 gig card for plenty of storage. 16 gig should also work. Use a good card like a Sandisk Ultra Class 10
more problems, more questions... sorry
I am trying to get the wifi to work on the Pi. I do not know what address to use. I have the eth0 set to 192.168.1.220. I tries 192.168.1.221 for the wifi. It seemed to work for a few mins. I was able to access the FPP through my laptop on this address. So, I shut down the Pi, unplugged the ethernet cable, plugged the Pi into the E682 to see if this would actually work, and ......nothing.
So, i tried to get back on through the wireless address via my laptop, and the page won't load. I plug in the ethernet cable, go in through the .1.220 page, and its fine, but doesn't show the wireless address on the top of the page (it was there before when I checked) All the info is still on the network page, just doesn't work.
Don't know where to go from here.
Secondly, I uploaded a sequence. Set a playlist. got a schedule for everyday from 6 years ago to 2024. Changed the end time to 23:59:59. but no blinky lights.
so, not sure where to go from here.
Thanks in advance
p.s. everything I see says this is a 20-30 min. process, I have been at this for 3 days, and I still have nothing. i am getting very frustrated.
bcer960 wrote:more problems, more questions... sorryI am trying to get the wifi to work on the Pi. I do not know what address to use. I have the eth0 set to 192.168.1.220. I tries 192.168.1.221 for the wifi. It seemed to work for a few mins. I was able to access the FPP through my laptop on this address. So, I shut down the Pi, unplugged the ethernet cable, plugged the Pi into the E682 to see if this would actually work, and ......nothing.
So, i tried to get back on through the wireless address via my laptop, and the page won't load. I plug in the ethernet cable, go in through the .1.220 page, and its fine, but doesn't show the wireless address on the top of the page (it was there before when I checked) All the info is still on the network page, just doesn't work.
Don't know where to go from here.
Secondly, I uploaded a sequence. Set a playlist. got a schedule for everyday from 6 years ago to 2024. Changed the end time to 23:59:59. but no blinky lights.so, not sure where to go from here.
Thanks in advance
p.s. everything I see says this is a 20-30 min. process, I have been at this for 3 days, and I still have nothing. i am getting very frustrated.
I had similar issue and found a tutorial somewhere that showed proper configuration for both IPs and they will show at the top of the page when you login into the FPP .
I struggled for days with this also and am sure I will again as I have forgotten near everything I learned about FPP.
OK,
I do have Pi working. It is running the sequence I put on it. The problem I had was not realizing that the schedule would not start until the following day. Once I set a new schedule for later today, it started up and is still running.
However, I do not have the wifi working, and have no ideas on how to get it working. I have watched (or rather re-watched) a few vids and found that I had the gateway number wrong. It is now 192.168.1.1 I can now ping the gateway, but no matter the number I put into the IP address (I have 192.168.1.100) it will not ping it, and of course I cannot open FPP from that address. I have updated the interface, rebooted nd turned it off and on, nothing works.
If anyone has any ideas, even if it is only a vid to watch, please let me know. I am assuming that if i can get the wifi going, I will not need the RTC, so for now I am abandoning the RTC
thanks
