pmiller
pmiller
@pmiller
Famed Member
Joined: Jan 14, 2015
Topics: 180 / Replies: 2615
Reply
RE: Do wire-to-wire 3 pin quick connects exist?

Kev7274 wrote:Use these with no issues. Those are just like the Weather Pack and do work great. Sent from my iPad using Tapatalk

5 years ago
Reply
RE: Do wire-to-wire 3 pin quick connects exist?

You may end up going with a Molex or Weather Pack connector. If outside the Weather Pack is waterproof. I used Weather Pack for years with no problems...

5 years ago
Reply
RE: narrow beam moving heads

Contact Tom Betgeorge if he’s still around. Sent from my iPad using Tapatalk

5 years ago
Reply
RE: BeagleBone Black

munu wrote:@pmiller that is a helpful picture. What are the two "power boards" you have there? They seem more than just duplicating connections. It se...

5 years ago
Reply
RE: BeagleBone Black

Here’s what used to be mine until I got out of the hobby. This is a 16 panel. You will see a black box attached to the frame on the right. That has a ...

5 years ago
Reply
RE: BeagleBone Black

munu wrote:@pmiller, I think I know what you are referring to. Before going from bottom right to bottom top I need to invert the board so the top righ...

5 years ago
Reply
RE: BeagleBone Black

Bottom right to top right won’t work because of data flow. The arrows pointing right shows the data flow. If you go to upper right the flow ends there...

5 years ago
Reply
RE: Vixen 3.8 released

waites wrote:Hi all, vixen crash after loading a music, any idea why is doing that. Thanks Sent from my iPhone using Tapatalk Could be corrupt f...

5 years ago
Reply
RE: E682 Maximum Output

joeyw1986 wrote:Hey guys, On to my 2nd year of this awesome hobby and I am expanding the show (who would have guessed). I have a single E682 controll...

5 years ago
Topic
5 years ago
Forum
Replies: 1
Views: 1276
Reply
RE: New tio Vixen 3

Due to my age I was scared when it came to sequencing. Younger folks seem to catch on a lot quicker. I made 3 arches and in less than an hour learned ...

5 years ago
Reply
RE: E682 5.030 uneven zig zag commands going haywire

TomsLEDs wrote:Well what I did was leave the preview alone. Went to the controller patch screen and unpatched everything. Next I selected the 1st grid...

5 years ago
Reply
RE: E682 5.030 uneven zig zag commands going haywire

I never made a pixel grid but try this. In Vixen preview select the Pixel Grid tool. Left mouse click in preview window and drag from upper left to lo...

5 years ago
Reply
RE: E682 5.030 uneven zig zag commands going haywire

I looking at your controller setup and I’m confused. You have the outputs setup for 170 pixels. Did you splice pixels together to get that count? If y...

5 years ago
Reply
RE: E682 5.030 uneven zig zag commands going haywire

TomsLEDs wrote:Actually this is a matrix 32x32. My tree is fine as the stands are are even numbered. I got confused because I'm building both. So it w...

5 years ago
Page 2 / 187