Vixen and E682 Cont...
 
Notifications
Clear all

Vixen and E682 Controller

4 Posts
3 Users
0 Reactions
2,226 Views
Posts: 79
Topic starter
(@tomas041857)
Estimable Member
Joined: 8 years ago
[#54453]

I have a question about the power for Vixen and the E682. When setting up the display in Vixen and I leave the brightness at 100% and I place the E682 brightness at 50% for example, is the output to the pixels 50% power?
Thanks for any help.


3 Replies
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

Yes. The controller brightness is used.

Sent from my iPad using Tapatalk


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Yes BUT: Vixen applies intensity information while generating your sequence and the controller applies intensity calculations to the data the show player send to the controller. The controller does not know what the original 100% was. So setting 50% intensity on the show player and then setting 50% intensity on the controller results in an effective intensity of 25%.


Reply
Posts: 79
Topic starter
(@tomas041857)
Estimable Member
Joined: 8 years ago

okay that makes sense. Thanks for the help.


Reply
Share: