I use the ones from RobG You have to order via a Goggle spreadsheet you can find in the post on the green site: (Check post 146) They are just the PC...
Please post the links to the build pics as I`d love to see them...
FYI, I updated this drawing as I had a typo in the Renard GND connections.... packetbob wrote:Here is the drawing...
And if you have an ESPixelPOP you can easily add a cheap RS-485 module and use it as a E1.31 to DMX convertor also... Look for the build guide called:...
Here is the drawing...
Here is a diagram showing how to connect one of the cheapy RS-485 modules to a ESP8266 running ESPixelStick so you can send out wired DMX.. This will ...
If your SS8 is setup for Renard DMX than I have a ESPixelPOP setup for that very purpose and you are welcome to it... Or just use the DMX output funct...
pakeonoahu wrote:Just tested BB's code (modified by him to support 74HC125), worked perfectly, color matches and all sequences after from "X" pixels f...
There was also this thread that covered a design by Barabybear:
And try a different power supply...
Try a different ESP-01 module... They are built pretty cheaply so you could easily have a flakey one (or two...) Could also be the 2N7000 MOSFET use...
Thanks for letting us know the outcome... I`ve not seen a driver issue causing such an issue before....
Make sure you confirm what COM port your ESP32 board is using. Use the Device Manager to ensure it shows up and disappears as you connect and disconn...
How many do you need?
As the saying goes: " If I die my only hope is that my wife doesn't sell my lighting stuff for what I told her I paid for it..
