michaelc
michaelc
@michaelc
Noble Member
Joined: May 30, 2007
Topics: 128 / Replies: 1412
Reply
11 years ago
Forum
Reply
RE: RenardESP Information Thread

Do the boards need to be oriented in a particular direction for reception Sent from my bat phone using Tapatalk

11 years ago
Forum
Reply
RE: RenardESP Information Thread

Would this work on boards running the Renard boards running the dmx protocol? Also how does the starting dmx address on the picc chip fit in Sent fro...

11 years ago
Forum
Topic
Replies: 0
Views: 1154
Reply
RE: DIY E1.31 Bridge 6 port - initial troubleshooting questions

I sent a message email through diyledexpress Sent from my iPad using Tapatalk

11 years ago
Reply
RE: DIY E1.31 Bridge 6 port - initial troubleshooting questions

After further examination, it looks like i may have only blown the trace from teh power supply. Does anyone know where I might find the schematics to...

11 years ago
Reply
RE: DIY E1.31 Bridge 6 port - initial troubleshooting questions

So I made a very rookie mistake. I finally am ready to test out my displays and I pull my previously working E1.31. bridge out of my storage box and ...

11 years ago
Reply
RE: 10W RGB LED driver boards (Ren/dumb RGB, WS2811, DMX)

Could someone give me an example of the system context that this dmx board would be used? What controller board and other hardware would go before th...

11 years ago
Reply
RE: 10W RGB LED driver boards (Ren/dumb RGB, WS2811, DMX)

I guess I'm missing how it is a DMX board then. The DMX protocols are pretty straight forward (data +, data-, GND). What makes it DMX and how would ...

11 years ago
Reply
RE: 10W RGB LED driver boards (Ren/dumb RGB, WS2811, DMX)

First time I'm seeing these dmx versions. I was an early adopter of the REN versions. I'd be in for about 10. I think we could pair them with one of ...

11 years ago
Topic
Forum
DMX
Replies: 5
Views: 3049
Reply
RE: Audio Bit Rates

One other question, how can you tell if a file is cbr or vbr? I don't see it in the properties.

12 years ago
Forum
Reply
RE: 10W RGB LED driver board

What aspect of the board failed? ukewarrior wrote:My first version of the board didn't work. so... no, not at this time.

12 years ago
Topic
12 years ago
Forum
Replies: 5
Views: 2332
Topic
Forum
DMX
Replies: 3
Views: 2812
Page 13 / 103