RenardESP Informati...
 
Notifications
Clear all

RenardESP Information Thread

383 Posts
50 Users
0 Reactions
182.2 K Views
Posts: 911
Topic starter
(@madsci1016)
Noble Member
Joined: 12 years ago
[#38659]

Hello all. This is a information thread on the RenardESP WiFi adapter. The development thread can be foundhere.

What does it do?

The RenardESP adapter will convert any Renard that uses the SS BOM (and most of the non - SS models) from a device controlled by RS-485 Serial to a device controlled by e1.31 or sACN over WiFi. It does this by replacing the RS-485 receiver chip on the Renard board.

So instead of running CAT 5 through your yard and connecting your Renards to a RS-485 USB adapter or an e1.31 bridge, you can cut the cords and stream all your control data over wifi. Here's an illustration:

You can continue to daisy chain Renards off the first one with the WiFi adapter, or you can install an adapter in all your Renards to go 'completely wireless'.

Installation is fairly easy. You just remove the 8 pin DIP receiver chip, and replace it with a ribbon cable adapter.

I'll have updated build instructions up shortly on my website here. There should be a group buy starting soon. In the mean time, please use this thread to ask questions and I'll update this post as needed.


382 Replies
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago
Reply
michaelc
Posts: 1540
(@michaelc)
Noble Member
Joined: 19 years ago

Would this work on boards running the Renard boards running the dmx protocol? Also how does the starting dmx address on the picc chip fit in

Sent from my iPad using Tapatalk


Reply
Posts: 911
Topic starter
(@madsci1016)
Noble Member
Joined: 12 years ago

I have written a DMX driver but I haven't tested it yet. It doesn't have a way to offset the data to a different start address yet, it would just send the data from the e1.31 universe over to DMX as is.


Reply
Posts: 22
(@bakesbrownies)
Eminent Member
Joined: 19 years ago

Will this work on a Ren-T? I have a ren64 XB and need the zero cross from it.


Reply
Page 1 / 77
Share: