If you are hooking a network cable directly between the 2 devices, you will need a crossover cable.
I lost my Mom on Nov 28, 1999. I can totally empathize with losing family around the holidays. You have my condolences.
I was rather ho-hum about your pixel snowflake creation...until I saw it as part of your show. By itself (in the how-to) video, I was uninterested in...
I've always wanted to build a cellphone jammer. **I know it is illegal** There was a lady who rode my vanpool who would call her husband everyday on...
I decided to go with these for the ethernet connection into my CG-1500's -
Wait until January/February for the group buys. You will save a lot. Downside is you won't get your items until May. Resist the urge to jump into t...
I almost went with those type of connectors like yours with the blue. Cable glands were a ton cheaper though, so I opted to use those instead. I do ...
We got about 3"-4" of snow on Saturday. From your live stream, it looks like you pretty much missed it all. You seem to be sure-footed like a billy ...
I have some of those Havahart humane traps that I bought for catching chipmunks...but I catch the occasional squirrel with them. I just put a single w...
I was thinking about some of the responses, and came up with a possible solution. Put a threaded PVC cap on like someone suggested, BUT in order to s...
Semper Fi to any fellow Jarheads out there.
This might be a case where you want to use multicast versus unicast. Unicast is a direct connection between each device, so 4 unicast devices use 4x ...
For $3, I said "why not?!"
My first thought is subnet masking. Make sure your subnet mask is set to 255.255.255.0, not 255.255.0.0 One way to avoid the subnet masking issue, w...
