"Starter" kit
 
Notifications
Clear all

"Starter" kit

8 Posts
4 Users
0 Reactions
3,396 Views
Posts: 15
Topic starter
(@bdrilling33)
Eminent Member
Joined: 11 years ago
[#39192]

Hello all!!!

Like most others here, I too am planning for next year and hope to check in on some after Christmas deals. The problem I'm having is, I first started looked at LOR, all their nice fancy all in one type items. While that's all and good, I stumbled across the diy version and this caught my attention for many reasons ha. What I need to know is what all do I basically need? I saw the diagram of all that's needed, but when you start looking for stuff it all runs together, SSRs, controllers etc.

So tell me, what should a starter kit consist of? And where can I find it?

Thanks
BD


7 Replies
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

if you are looking for a controller too run either incandescent lights of leds you may wanna look at WayneJ's starter kits http://doityourselfchristmas.com/forums/showthread.php?22450-SS-Renard-Kits-Now-Available-%28current-11-7-15%29 and then you need too decide on a ss8,16,24 board if you are ready too solder your own boards if not maybe find some that others are selling

this is list of what Wayne has in his kits
V-FMT212R FM Transmitter
Small antenna
USB cable
1 - 3.5 Audio cable 6' (optional use with stand alone mode on transmitter)
25 - SPT-1 Vampire Plugs
50 feet of SPT-1 18-2 wire
1 - 12' Power Cord for the controller (13A)
1 - 50' pre-made Cat5 cable
1 - USB/RS485 adapter (enclosed in yellow heat shrink for protection)
1 - mating USB cable
1 - RS485 unit to Cat5 adapter


Reply
Posts: 15
Topic starter
(@bdrilling33)
Eminent Member
Joined: 11 years ago

Yeah ready to solder, I'll check them out. I think I have an idea on pixels (sansdevice) just didn't know where to turn for LEDs etc.


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

as for pixels it depends on your plans I am using 4 px1s in my show this year used 2 for a 12' pixel tree last year 12' including pixel star so 8' tree


Reply
Posts: 1792
(@barbotte)
Noble Member
Joined: 17 years ago

before buying and building anything ,,,righ now is the time to draw stuff of what you are planning having in your set up ..then the type of light your planning using then you can decide on controller ..i purchase so many light and controller that are still in the box never build or used just because i though i would used then to find out that i went the other direction ,,, plan ,,plan ,,plan and u will save money at the end ,,,as for controller there is ton to choice from and after Christmas ( early spring ) there are ton of controller on a pre-buy/group buy that will save you money and that goes to pixel too cheer


Reply
Page 1 / 2
Share: