update: combined the two circuits above and converted the ac current to dc. the wallwart is rated for 1.25 amps at 12v ac, but seems to put out a litt...
found this: Vout = Vin Rb/( Ra + Rb) if Ra and Rb have the same value, it will divide the voltage by 2.to convert the ac output of my spare wallwar...
thanks. i have a spare wallwart that outputs 12v ac. i plan on running to radio shack and picking up some diodes to convert it to dc. other than usin...
rstehle wrote:Not sure if this is what you are looking for, but it has some useful info...... i have that page bookmarked. good tutorial on making t...
Josh wrote:*** PHP and MySQL support with no restrictions *** Absolutelly no advertising! these are both biggies. i'm going to have to check this o...
mrpackethead wrote:Heres a simple problem to start with... Take a standard low power 5mm LED, a 9V battery, a switch and a resistor... I want 20mA to...
i'm basically looking to learn to design circuits for some ideas to use next year (or the year after) and am looking for a starting point. thanks for...
no, you're right there. i've looked at data sheets for some chips. some manufacturers give simple schematics on how to use their chips, but not all of...
i hate to do this so late in the game, but i had something come up today and i need to drop out.
i may have missed a post about this, but will the coop include the pcb? Jayson - are you still posting BOMs? I was looking for the Firegod unit.
JaysonH wrote:I'll check on this again, though last time they wanted to know my business information, of which this coop is not being run under any bu...
