Hi no dimming is involved, it will just be used to turn the lights on and off, thanks pete
Hi Kev once again thanks for your input, hope you caught plenty of tuna, sorry its been a while to reply, work is getting in the way of Christmas l...
Hi Kevin thanks for replying i have a Wifi connection, so can be either, would i need to by a wifi adaptor for the arduino? my network system is i ha...
hi each pixel needs 3 channels, so 170 pixel will make up 1 universe of 510 so pixel 1 would be channel 1,2,3 pixel 2 would be 4,5,6 ect universe 2 ...
Hi thank you for your reply, I use a san device e682 to run the pixels, the issue is the pixels will automatically turn on via vixen then i have to tu...
I brought a d-link DIR 615 and flashed it with dd-wrt to create a wireless bridge, works great and gives you 5 ports.
Thanks, I shall give that ago, one last strange thing, every time I plug in the mega to the pc, I need to upload the sketch otherwise nothing happens,...
a huge thank you Kev, I changed above setting and it worked thank you so much. one question is it easy to remove the random bit thanks.
I have tried both matches to 48 channels, I was playing around thinking as I only have 2 relay boards I would change the sketch and the generic serial...
I have patched elements to outputs of the serial controller, I set up single elements and patched then to the controller. yes that's all I changed, so...
hi did you ever get the codes to work, im having the same issue, everything I have read and tried doesn't seem to work, its like vixen wont talk to th...
I am using vixen 3.3u2. The IDE I shut down, am using comport 3, Still nothing.
first of all I would like to say thanks kev for your time, its much appreciated. yes I am using a external PSU for the relay board. No I haven't for t...
