LOL, yeah that's what I'm thinking..
Yeah. I can appreciate that...Its all working at the moment so that's what matters.
Great! Thanks for all the help, I posted another question in another part of the forum about the alphapix16, got a lot of help there also. I had sent ...
The above set up works! Thanks
Thanks for the info..yes the link you showed is basically what I am using..The alphapix16 board are my controllers. The Holidaycoro site mentions usin...
You are correct Jerry-Rigs, Im just looking for a fast answer...I mis-typed my previous info..the first controller IP is 192.168.0.50 and the PC netwo...
Hi, Im just getting around to doing this, what IP address should I set the second alphapix16 to? The first one is the default 192.168.0.1... Thanks
Gotcha, it does seem to be running just fine with 1....
All 12 working, but guess I should add my second power supply...all white is 3 amps each...most of this time they are not white but I will add the sec...
AHhhh! Thanks bro! I had my xlights setup at 512, changed them all to 150...now its all good! Thanks so much !
OK I changed that also, to tree ribbon..no change...does the alphapix board have to be set up just like the xlights model channels? IN other words, bo...
I changed them all to 150, still just the first 4 respond to the sequence...here is my megatree layout in xlights..
Like this...the first 4 work, but the rest dont...
OK, now, I added 2 more pixel strips to the controller, for a total of 6. Running the same little test sequence only the first 4 respond...but, all 6 ...
