Ouch.
OK, It sounds like you have a device like this or this. Those devices are designed to allow one computer to talk to 2 different networks at the same time. I have not used one before and they are kind of a niche thing (that's why I say "Ouch.". There are a number of ways to make it work depending on the exact configuration.
Two things would help a lot:
1) Please provide a web link to the exact model of "USB Dual Port Network Switch" you have.
2) You are running windows? Please provide -all- of the output from "ipconfig /all". If you are running Linux, or Mac OS, the commands are different.
I'm not familiar with the dongle but, ... the more I think about it, the more I think you have it right.
Here is what you described:
PC Network 2 IP = 192.168.0.1
PC Network 3 IP = 192.168.0.101
Controller 1 IP is 192.168.0.50
Controller 2 IP is 192.168.0.100
XLNC: Yes, add another E131 setup with the IP of 192.168.0.100 for controller 2.
Hook up some some pixels to both controllers and use the XLNC test tab to turn on everything.
If it works, it works. If not, I'll tell you about "netmask", "dual homing", and bears oh my.
Do this before going down the "ipconfig /all" route
Thanks for the info..yes the link you showed is basically what I am using..The alphapix16 board are my controllers. The Holidaycoro site mentions using a ethernet switch , even up to 6 ports..mine just has 2. And yes, this is exactly what I have:
PC Network 2 IP = 192.168.0.1
PC Network 3 IP = 192.168.0.101
Controller 1 IP is 192.168.0.50
Controller 2 IP is 192.168.0.100
I will try this possibly later tonight, maybe tomorrow as I have a busy schedule right now...will let you know what I find! Thanks!
The above set up works! Thanks
I'm running 5 Alphapix controllers. The IP addresses are set to:
192.168.0.50
192.168.0.52
192.168.0.54
192.168.0.56
192.168.0.58
The Raspberry PI running FPP is set to an IP address of 192.168.0.48
