Help, matrix setup
 
Notifications
Clear all

Help, matrix setup

4 Posts
1 Users
0 Reactions
1,632 Views
Posts: 53
 JRF
Topic starter
(@jrf)
Trusted Member
Joined: 11 years ago
[#41094]

Hi
Attached are pictures/settings

IMG 1955
IMG 1956
IMG 1957

...I will try to explain how I have this made.

1) .I am using brilliant bulb strings which had 50 bulbs per string, I had to cut 4 bulbs off each string so they would simply fit into the boscoyo strips. So there are 46 bulbs per string.

2) I connected 2 strings together by soldering, so every 4 boscoyo strips are actually 2 strings of 46, equaling 92 bulbs on 4 boscoyo strips.

3) on the controller (alphapix16) in this instance in the picture, I am using output 1 (output 1 is the first 4 boscoyo strips - really 2 strings of lights ), output 2 ( the next 4 boscoyo strips- again really just 2 strings of lights ) and output 3 (the last set of 4 boscoyo strips in the picture ), 12 stands overall but only 6 actual strings of lights.

4) I cannot get all bulbs to light up on the xlights test -( "select all" is being used for simplicity on xlights), so just the first set of 4 (which again is 2 strings of 46 bulbs, totaling 92 bulbs connected to output 1 on the controller ).

5) the other strings will not light up on xlights test ( they do light up on the board self test )..

6) where are my settings wrong?

Thanks!


3 Replies
Posts: 53
 JRF
Topic starter
(@jrf)
Trusted Member
Joined: 11 years ago

Oh and here is the e131 setup on xlights...276 channels since 92 times 3 = 276 channels per output..

IMG 1958

Reply
Posts: 53
 JRF
Topic starter
(@jrf)
Trusted Member
Joined: 11 years ago

I think the problem is in the controller set up, maybe? I can put crazy numbers in the DMX start universe ( like 512, or 510 on some SPI ports ) and get more lights to turn on, but never all....


Reply
Posts: 53
 JRF
Topic starter
(@jrf)
Trusted Member
Joined: 11 years ago

I just figured it out...LOL....I changed the alphapix settings to 92 Pixels connected, not 276 ( I was thinking channels )..nqw its working...!


Reply
Share: