ronp5683 wrote:I would recommend Quartus V9.1, the newer versions are harder to use and buggy. Funny you would mention that. I Do use version 9.1. B...
I would just go to Altera website and download there Quartus software package. it's free. Also. You will need a programmer. Go on Ebay and look for a ...
wrichards wrote:Have you had any problem of the pumps failing? The website says "Exclusive moisture-proof seals" not Waterproof, have you had them get...
wrichards wrote:Have you had any problem of the pumps failing? The website says "Exclusive moisture-proof seals" not Waterproof, have you had them get...
Roterhead wrote:For slip fittings you can also look
djred2000 wrote:Great video! I have a couple of questions. What servo are you using? What is the pvc coupling that allows the nozzle to swivel? Th...
michaelc wrote:Nice vid. What was the midi software you were using on the second monitor? Sent from my iPad using Tapatalk Cakewalk
timon wrote:If you needed more than 1,000 fpm for a larger stream do you see a problem feeding two pumps into a manifold, not a Tee but more like one ...
Have you had a chance to try those Harbor Freight 1000GPH pumps yet? Did you ever build a PWM controller for it? If your interested. I just made a vi...
yarnos wrote:Why don't you look at Vari Drives (Variable drives), most good drives have these parameter settings available for ramping up and down wit...
djred2000 wrote:Does DMX Control or PC Dimmer support MSC natively? I can't seem to figure it out. I can't tell you if they are MSC complainant but ...
djred2000 wrote:I will have to look into this. Are you using Sonar X3 or another Cakewalk program? It's a very old trial version from 1999. It's a ...
djred2000 wrote:I have been using DMX Control for a long time and think it's a great program as well. Are you using Cakewalk to send midi show contro...
jdc928 wrote:@lightup yes. One the same arduino teensy board, I have a adafruit mic input board ($5) that I have removed the mic from and soldered on ...
jdc928 wrote:@lightup yes. One the same arduino teensy board, I have a adafruit mic input board ($5) that I have removed the mic from and soldered on ...
