FPGA Development So...
 
Notifications
Clear all

FPGA Development Software

6 Posts
3 Users
0 Reactions
2,514 Views
MartinMueller2003
Posts: 7614
Topic starter
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago
[#30572]

Does anyone have a good suggestion for free software that can be used to develop an Altera 40K based FPGA design?

Martin


5 Replies
Posts: 39
(@joyangel)
Eminent Member
Joined: 19 years ago

I would just go to Altera website and download there Quartus software package. it's free. Also. You will need a programmer. Go on Ebay and look for a Altera USB-Blaster. They cost about $12. BTW: Where did you get the 40K chip from. I assume that's 40k LE's. If so. That one hell of plumb and juicy chip you get there.


Reply
Posts: 238
(@ronp5683)
Reputable Member
Joined: 14 years ago

I would recommend Quartus V9.1, the newer versions are harder to use and buggy.


Reply
Posts: 39
(@joyangel)
Eminent Member
Joined: 19 years ago
ronp5683 wrote:I would recommend Quartus V9.1, the newer versions are harder to use and buggy.

Funny you would mention that. I Do use version 9.1. But that's only because the NiosII package is free. In the newer versions. You have to pay extra for that.


Reply
MartinMueller2003
Posts: 7614
Topic starter
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Thanks Guys

I had stumbled onto the Quartus 13.1 code and that seems to be working OK. I have not actually created a bitstream yet but my design is making progress. I am hoping to have a single controller that can handle 50K+ pixels in a single device.

Martin


Reply
Page 1 / 2
Share: