pmiller wrote:If you're using Cat5e this is how I run Renard. The Orange and orange strip is Gnd. The solid blue wire is Clk and the blue stripe wire ...
I was under the impression that with the new firmware that you could assign dmx or renard to a single port now instead of the whole block
Stormyblade wrote:I went to your link and applied to join. Thanks for linking it! My name is Inigo Montoya....just kidding, Jerry Thompson
studiopro wrote:I will second this. I run some of mine at 40% and can go near 150 and still have around 11 volts at the end and no noticeable color ch...
In all actuality, if you keep you intensity down, you can run a strand of 100 pixels without power injection in the middle.
Stormyblade wrote:I'm just west of Hillsboro, but I am still in the learning and building process. There is a lighter out there in Hillsboro, he han...
notw22 wrote:My setup is similar to this image where I have a 50 pixel strand powered from the controller, and then about 100 pixels directly connecte...
bjhays wrote:Moved here 3-4 years ago. Ok, sounds, good, ,check out that link i posted, good group of lighters from around the NW.
I had good communication with them about my pigtail issue up in til 6 days ago then it stopped. They sounded like they wanted to make it right, I was ...
gunther wrote:I am nearby in Beaverton Tony Sent from my SM-T813 using Tapatalk You have my condolences.
kdoyon wrote:Neither. I'm logging in to the Wi-Fi access point on the router. Both the windows machine and the Mac will make the connection through Wi...
Wait, i just saw your location, did you move here or just visiting?
bjhays wrote:Looking to connect with others in PDX! I am in Sherwood Nope, just outside Newport in SIletz. You need to head on over to this facebook...
On anther note, go to your local goodwill store, i have gotten some good wireless routers for dirt cheap. I have all my Pi's hooked to one now, i dont...
