JEC
@jec
Reputable Member
Joined: Sep 4, 2007
Topics: 39 / Replies: 347
Reply
RE: Entry-level Board

fkostyun wrote:I think its as good idea also - one suggestion to take it to the "next level" would be have a way to program it by just having it conne...

18 years ago
Forum
Topic
18 years ago
Forum
DMX
Replies: 0
Views: 1882
Reply
RE: RGB Pixels - Last Batch of the Season

ukewarrior wrote:Are you ordering the through hole or smt boards? Given the DIY nature of the group I'd like to see the through hole myself. Hi Uke...

18 years ago
Reply
RE: RGB Pixels - Last Batch of the Season

ukewarrior wrote:Any opportunity to get just the pcb's while your doing an order? Sure - just let me know the quantity. I don't have an exact price...

18 years ago
Reply
RE: RGB Pixels - Last Batch of the Season

DennyMo wrote:Is this price for the bare boards or fully assembled pixels? Sorry for not being more clear... These are fully assembled and tested. ...

18 years ago
Topic
Replies: 18
Views: 10042
Reply
18 years ago
Forum
Reply
Reply
RE: Quick DMX Terminator

Pins 7 & 8 (brown, brown/white on the patch cables I use) If you pick the wrong pair you'll put 120 ohms across your +12v supply and ground.

18 years ago
Forum
DMX
Reply
RE: Quick DMX Terminator

Matt_Edwards wrote:carefully stick the ends of the resistor in the sockets for pins 2 and 3 on the dmx output of the last device in the chain or just ...

18 years ago
Forum
DMX
Reply
RE: Funny DMX Issue

tconley wrote:the ssr will runn for a while then drop off or when one controller plug in another drops and stops responding. but when it stops contro...

18 years ago
Forum
DMX
Reply
RE: The DMX Offset Machine / Pixel Driver / Self-Contained Show Controller

Absolutely. If you look at the photo from post #13, you'll see pads for a three-pin header right next to the (unpopulated) RJ45 pixel driving jack. ...

18 years ago
Forum
DMX
Reply
RE: Assembled & Tested RGB Pixels

luisr wrote:Hi John I want to know how can I connect the DMX Offset Machine in the stand-alone Thanks again in advance.:D Luis Hi Luis, I'm not ...

18 years ago
Reply
RE: Switchless DMX code

Wybron makes an RDM receive stack available at no charge to developers & manufacturers. It's written in C, seems very thorough, and requires signing ...

18 years ago
Forum
Reply
RE: Octocouplers

What's the part number?

18 years ago
Page 9 / 26