Funny DMX Issue
 
Notifications
Clear all

Funny DMX Issue

11 Posts
6 Users
0 Reactions
5,896 Views
tconley
Posts: 410
Topic starter
(@tconley)
Honorable Member
Joined: 19 years ago
[#4564]

I have my system setup for halloween but i am having interesting issues where i keep have to reboot(unplug and replug) my ssr4 controllers every so often. It is almost like they are fighting with each other but they continue to pass the dmx signal down the line.

computer--->lynx dongle-->mr-16 controler-->ssr4-->ssr4-->ssr4-->Pixel pw injector-->(7) pixels

no terminator after the pixels.

how do i fix this i have tried swapping out the ssr4 but it doesnt seem to help.:confused:


10 Replies
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago

What is the symptom that you are seeing that prompts the need to reboot/reset?


Reply
tconley
Posts: 410
Topic starter
(@tconley)
Honorable Member
Joined: 19 years ago

the ssr will runn for a while then drop off or when one controller plug in another drops and stops responding. but when it stops controlling the lights it is still passing the dmx string down the line.


Reply
wjohn
Posts: 1102
(@wjohn)
Noble Member
Joined: 20 years ago

TC,

I'd suggest that the problem is Firmware Issue, and a off chance it is comms related.

the fact that all the other devices continues to function and respond to DMX commands suggest that the SSR4s may not be responding to commands.

I know that the SSR4 is a recent development, are you the first to test them in anger? i.e. in a show and not just on a bench?

I'd ask RJ if there is anyway to add some diag functions to the SSR4 and make sure it is still looping around and processing its code.


Reply
Posts: 386
 JEC
(@jec)
Reputable Member
Joined: 19 years ago
tconley wrote:the ssr will runn for a while then drop off or when one controller plug in another drops and stops responding. but when it stops controlling the lights it is still passing the dmx string down the line.

That's actually a good way to fail. One fixture should be able to fall off-line without disrupting anything upstream or downstream.

In theory, most DMX devices should be 'tapping' the DMX line, rather than receiving it, parsing it and re-transmitting it...


Reply
RJ
Posts: 673
 RJ
(@rj)
Prominent Member
Joined: 19 years ago

I know you did not answer rick on DLA when he was asking about your problem, did you get it fixed? A number of us have tried to duplicate the issue with the SSR4 and are not able to. Could you try them not connected to the pixels?

Here's a link to a video of dad and I doing some testing today. I am afraid while I am not having issues with the SSR's I am with all the CDI LEDs we bought.

http://diylightanimation.com/index.php?action=dlattach;topic=606.0;attach=507

RJ


Reply
kostyun
Posts: 2178
Guest
(@kostyun)
Member
Joined: 20 years ago

I belive he answered this in chat the other day, and it as a cabling issue.


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago
fkostyun wrote:I belive he answered this in chat the other day, and it as a cabling issue.

What specifically was the issue with the cabling?


Reply
wjohn
Posts: 1102
(@wjohn)
Noble Member
Joined: 20 years ago
RJ wrote:
Here's a link to a video of dad and I doing some testing today. I am afraid while I am not having issues with the SSR's I am with all the CDI LEDs we bought.

http://diylightanimation.com/index.php?action=dlattach;topic=606.0;attach=507

RJ

The test looks fine, pity about the CDI leds? Did paul give an explanation (and warranty) for the string failure. there must be thousands out there and if you are seeing failures, within a smal sample size, it does not look good for the larger population.


Reply
kostyun
Posts: 2178
Guest
(@kostyun)
Member
Joined: 20 years ago

He's replaced mine (the dead ones - blue sets) - and I think its a manufacturing problem - from what I've read been pretty much on the M5's, and the M5' reds have had a horrible time.


Reply
Page 1 / 2
Share: