Last seen: Nov 17, 2026
Carl D V wrote:I'm Baaack. Hey guys and gals: My original post seems to have Petered out...without getting the info I would like to get. So...I wou...
jValue wrote:HI, While I was fumbling around trying to understand why one of the 5 mp3's in my show is not broadcasting in FPP I created a playlist w...
Turns out the issue was a faulty power supply. It was supplying 5vdc and was rated for 2 amps, but when put under the little bit of load that the wiz...
iflights wrote:Stare and compare complete. Looks great. I found nothing to call out. Perhaps this...perform a Hard Reset and see if the Act led res...
iflights wrote:If you are willing, post a photo of the component and soldered sides and I'll be glad to compare visually against mine. Maybe a 2nd pa...
outbreak wrote:Do you have the other E1.31 connected to your switch when you connect this one? Nope. I did plug it into the switch once to see what...
iflights wrote:If you are willing, post a photo of the component and soldered sides and I'll be glad to compare visually against mine. Maybe a 2nd pa...
absolutely! I had installed it in the correct orientation from the get go.
I work at a charity haunted house and it is all about the props. We use around 15 raspberry pi's (usually one per room) controlling lights and motors...
I joined the group but the timeline was too restrictive so I had to bow out:( I'm a V3 user so with having to learn xlights, do the tracks and maint...
Happy Birthday!
barbotte wrote:i dont mind sharing cost but usually i dont order anything before July as i never know what i will be updated or change in my show ,,, ...
TheStealth wrote:Hi All, I'm finally going to get started in the pixel hobby :biggrin:. Gathering from what I have read on these forums, RayWu seems ...
