Activity
 
Notifications
Clear all
jcommisso
@jcommisso
Trusted Member
Joined: Apr 30, 2017
Topics: 2 / Replies: 47
Reply
RE: Controller recommendations for integration into an old Renard 16 show

Forgot to mention that the ESPixelSticks can also be run from FPP if you wish to retire your show PC. The newer ones have SD card slots so that they c...

4 years ago
Reply
RE: Controller recommendations for integration into an old Renard 16 show

You can use the show PC to run the ESPixelSticks like normal. I did run into lag when running ESPixelSticks wirelessly. The access point I was using w...

4 years ago
Reply
RE: Controlling Two Different Pixel Voltages (12V, 5V) from the same controller

You could use different connectors for different voltages, like xConnect for 12v and Ray Wu for 5v. That way you don't mix up voltages.

4 years ago
Reply
RE: Controller recommendations for integration into an old Renard 16 show

Vixen 3 is excellent in terms of user friendliness. It has a nice GUI and its very fluid with its click and drag interface. Great if you're just getti...

4 years ago
Reply
RE: Controller recommendations for integration into an old Renard 16 show

This should be able to interface with Renard using a special crossover cable, as it says 2 DMX serial outputs.

4 years ago
Reply
RE: Controller recommendations for integration into an old Renard 16 show

1. Both Vixen 3 and xLights will allow you to use a mix of AC and pixel, so that's not a problem at all. 2. Falcon, Kulp Lights, and Experience Ligh...

4 years ago
Reply
RE: 2022 Christmas Show

Do You Hear What I Hear:Light of Christmas:Rudolph the Red-Nosed Reindeer:

4 years ago
Forum
Topic
Forum
Replies: 1
Views: 1637
Reply
RE: First Christmas Show

I think you did a very good job sequencing. The only advice I'd have for you is don't be afraid to use a little more motion and flashing, especially t...

4 years ago
Forum
Reply
RE: Show Networks - Still Required????

I still do a show network as I prefer to keep my blinky stuff separate, but it's unnecessary. Master/remote won't clog up your home network.

4 years ago
Reply
RE: ESP Questions/Issues

Honestly the router/AP makes a huge difference. Last year was my first year doing wireless, and I tried an old Linksys with OpenWRT, an old Apple Airp...

7 years ago
Forum
Reply
RE: Smart home == ESP-01 (Sometimes)

My 3D printer reports itself as an ESP also. I was quite confused at first, but then I realized that it was the printer. Sent from my iPhone using Tap...

7 years ago
Forum
Reply
RE: Mr. Christmas Lite-Write Laser Show - Programming?

I’ve never had one, but they look really cool in real life. That’s all I have to add here.

8 years ago
Forum
Reply
RE: Will HLS run on A raspberry pi 3?

I’m not too familiar with HLS, but I believe there is no ARM based version. You can, however, use FPP to play sequences.

8 years ago
Reply
RE: Can you use an iPad

Sequencing over RDP is torture. There is an audio lag for the most part. You can, however buy an app called Duet display to use the iPad as a second...

8 years ago
Page 1 / 4
Share: