I've been observing the teensy/octo trend from a safe distance. My biggest concern is how many pixels? How good is the frames per second? I've also b...
Patching issue, maybe? Even though the controller is listed and active, it has to be patched to elements in the show. Sent from my iPhone using Tapata...
Last year, I run mine from one of those 50' USB cables. It would sometimes drop connection. The computer was disconnecting, then reconnecting. The pr...
Supply external power to the arduino, also. The USB port can cut out and leave you out if sync, or just plain out. Sent from my iPhone using Tapatalk
Me too. I've had glitches in this last show. Gotta figure that out before planning upgrades. Sent from my iPhone using Tapatalk
The RS485 adapter will bypass the ch340 chip on the receiving arduino. Sent from my iPhone using Tapatalk
The relays I use have an opto-isolator on the control side. My relays are fed from a separate 5volt power supply. Sent from my iPhone using Tapatalk
Make one. It should. I don't think you will find a plain cable. To keep noise down, route that cable away from power cords. Sent from my iPhone using ...
Probably no major problem. Put the data on one pair, power on another. The active extension cables have a hub-like device in line to serve as a buffe...
there are some US sellers on EBay with active usb extention cables. I'm running my show with a 25' and 50'.
for this sketch, you must set a header of ~! also set your parity to none. I use this same sketch, but i commented out the random mode. Hope I was Hel...
I think I figured the speeds out. I found an AVR calculator that broke it down well enough for me to understand. Sent from my iPhone using Tapatalk
I've reached a couple stumbling blocks, & I might have to approach things differently. I have been informed by Visual Studio that I must upgrade to Wi...
You have been more than helpful. At a minimum, your screen-name will be in my 'special thanks' credits. If you compile a new plugin, maybe change the...
Thank you for pointing me toward the answers. If I can get the visual studio to download, I will attempt to make this happen. Would you be willing to ...
