Try this... take the shebang (#!/usr/bin/python) away from the top of the file, and then try this: --$ python /home/fpp/media/scripts/email.py ...
When it happens, are there more people stopped looking at your show? Could be their mobile devices are interrogating your show WIFI, when if there ar...
Sorry I dropped off the face of the earth... I had to go out of town, job got ridiculously busy (don't they know I've got *important things* to do, li...
I've not had issues with water penetration *yet*.... my issue has been odd Wifi issues. Originally I was using a Netgear repeater... once the ESP's c...
Nice! I'm testing one myself right now, that does similar... parses the universes file, pinging only active or all, or alternatively a list of IP add...
OK, this is a simple script; put your info in where appropriate at the top (message you want to send, "from" address, "to" address, and your gmail l...
Setback... in order to run it on a schedule, you have to set it as an event, and then in a playlist. I set it up in a schedule, with the "repeat" bo...
OK, I banged together a python script, and successfully pinged my controllers and emailed me the results!!! A little more testing and I will share i...
Did you add any hubs/switches between your show director and your e682 that wasn't there when bench testing?
Same thing happened to me... had a couple of ESP's that didn't join WIFI at power up like they were supposed to. I think I'm ditching the exim4 route...
your 12v ground, and the huzzah supply grounds should be the same ground. Also, the ground INTO and OUT of the ESP should be the *same* ground. I ha...
couple things: first, the ground for the ESP and the ground on the 12v side of your power supply should be connected together.... the ws2811's most li...
Re: Sequence from last year "flickers" when exported with this year's release Yep... you nailed it again. I want to do a show to music, but for safe...
