Re: Sequence from last year "flickers" when exported with this year's release Yep... the effect starts on a multiple of 50ms, and the interval is 250...
Lesson I just learned the hard way: When you order stuff ahead of time, well in advance, make sure you give more than a cursory examination. That wa...
well, that was quick... LOL
angus40 wrote:If using 30 pixels /m you are injecting every 150th pixel using 5v . 12v may require injection every 100 pixels or so . Yes, a 5m ...
If you are 100% positive it is him: Stop transmitting, do not use outside speakers... put up a sign: "Sorry, no music due to complaints from
The default answer to this is YES, unless you specifically disable output.... it sends "blanks"... which very well could cause flicker. *It happened t...
The Trendnet has the WPA/WPA2 option, which appears to offer both... that was the setting I'm using. I'm thinking it has just gotten knocked off the ...
Well, turns out the old Trendnet has a few issues... so it's getting ready to hit the recycle bin. I'm using the house wifi now, which is not too bad...
I set the IP address manually, and the SSID/password on the ESP after joining it to my "regular" home wifi network first, made the changes, saved, an...
The AP is a dumb AP.... so no DHCP available. I assumed since I had the ESP IP set statically that it wouldn't be looking for a DHCP server... oops. ...
Gilrock wrote:I zig-zag my 32x42 pixel tree as well but I've switched to doing the zig-zag in the controller. You can zig-zag in xLights though. Whe...
