Random network free...
 
Notifications
Clear all

Random network freezes

7 Posts
3 Users
0 Reactions
3,060 Views
kwoodard
Posts: 281
Topic starter
(@kwoodard)
Reputable Member
Joined: 13 years ago
[#44066]

Has anyone experienced any random network freezes using the FPP?

To give some background, this is my second season using the FPP. No issues last year at all, but there were some changes to by setup. The basic setup is the FPP has a wireless connection to my home network (DHCP) and a wired connection (static IP) to a wireless router that is my show network. In attention to the PI, I have two E6804s hardwired to the router. I also have 9 ESPixelSticks that connect to the router. (Last year, I didn't have any ESPixelSticks; therefore, I just used a simply 4 port switch). I'm using a cheap D-Link home wireless router and the show ran flawless for the first couple of weeks.

But .... a few days ago, I began experiencing freezes during my show where all of my pixels "froze" while my legacy AC lights continued to run. After some investigation, I realized that the Ethernet connection between the PI and the router had gone down. Logging into the show network (via wifi), I was able to successfully ping all my controllers. This occurred several times over the course of a couple days and happened 3 times during my show running on Friday night. It was very disappointing to look out the window, see the show frozen, and have to reboot the show.

Because of this, I now have a script that runs that pings all of my controllers every 10 minutes during the day and texts me if any controller doesn't respond. Since I've started running this script, I haven't had any Ethernet problems. But, tonight, the show was running great but I couldn't log into the FPP via the home network (wifi). So, I suspect (no evidence) that a similar issue occurred on the wireless network.

During troubleshooting, I swapped out the Pi with a new one, but the problem remained.

So, has anyone seen any issues like this before? Any ideas?


6 Replies
Posts: 843
(@captainmurdoch)
Prominent Member
Joined: 14 years ago

I believe dome people have reported router issues if the port is only sending constantly and never/rarely receiving. If this is your issue, your ping causes some receive traffic and keeps the port alive. I don't know if this is the router trying to be too smart for its own good or what but this sounds similar to the issue I have seen one or two others report.


Reply
kwoodard
Posts: 281
Topic starter
(@kwoodard)
Reputable Member
Joined: 13 years ago

Thanks. That was my leading suspect even though I didn't know if it was feasible. I've added a ping of my home wireless router to my script and see if that resolves my issues completely.


Reply
kwoodard
Posts: 281
Topic starter
(@kwoodard)
Reputable Member
Joined: 13 years ago

I'm still having issues with this and have almost exhausted my ideas. I've swapped our my pi and my wireless router and am still seeing issues.

After running for several hours, I begin to see intermittent ping failures with some of my pixel sticks. Then, after 24-36 hours of running, it appears I lose connection between the Pi and all the wireless devices. If I connect my laptop to the network, I can ping all the devices. When I reboot the Pi, everything returns to normal.

I'm wondering if the ARP table is somehow getting corrupted on the Pi, causing the Pi to loose connection to the wireless network. But, I'm open to other ideas as I'm getting frustrated with this.

Keith


Reply
Posts: 843
(@captainmurdoch)
Prominent Member
Joined: 14 years ago

Is there any way you can put a monitor and keyboard on the Pi and run some commands next time it happens? If you can run the troubleshooting commands script and log it to a file that might help diagnose the issue.

If you can do so, login as the 'fpp' user with password 'falcon' and the run the following:

cd /opt/fpp/www
php ./troubleshootingText.php > /home/fpp/media/logs/troubleshooting.log

How are you rebooting the Pi if it goes off the network? At the command line you can type "shutdown -r now" to reboot.


Reply
kwoodard
Posts: 281
Topic starter
(@kwoodard)
Reputable Member
Joined: 13 years ago

I can still access the FPP web interface from my home network -- just not the "show" network. So, I've been rebooting using the Reboot button on the web interface. When I get home, I'll ssh into it and grab a copy of the troubleshooting log file and see if it helps.

It has run the past two days without any hiccups at all.


Reply
Posts: 108
(@irishale)
Estimable Member
Joined: 12 years ago

When it happens, are there more people stopped looking at your show? Could be their mobile devices are interrogating your show WIFI, when if there are enough of them, can cause hiccups. I haven't tried not broadcasting the SSID yet, but I might if I start seeing issues like that.

Also, keep in mind what we're doing here is very timing sensitive, so seemingly minute things that wouldn't cause a hiccup with normal traffic will cause things to get out of sync. I'm going to bet that that wireless router you have actually has a hub in it instead of a switch. I was having similar issues as well, and I ditched my wireless router and used a true unmanaged switch with true APs (single LAN port), both from TPLink... and so far, so good.


Reply
Share: