Henne
@henne
Eminent Member
Joined: Nov 24, 2008
Topics: 0 / Replies: 22
Reply
RE: DMX4 SSR Project

Hhm - I have only 50Hz and so I'm simulating the 60Hz... If you port your firmware to the transceiver HW I can verify it for Europe. (I don't have th...

17 years ago
Forum
DMX
Reply
RE: DMX4 SSR Project

I should have written my code in c from the beginning... 😀 The firmware looks nice (the macros are a good idea). What about firing curves for bright...

17 years ago
Forum
DMX
Reply
RE: DMX4 SSR Project

To JECs pixel / remote adressing: I have written a complete RDM responder stack for AVRs (which will be improved todeay to become compatible with ENT...

17 years ago
Forum
DMX
Reply
RE: DMX4 SSR Project

Hi, the internal oscillator isn't that precise... Your proto might work well and the next 10 modules, too. Some months later you buy another bin of ...

17 years ago
Forum
DMX
Reply
RE: Building Henne's transceiver

If it indicates it has no signal - there is no signal. if it indicates, the signal is not OK - there is no DMX, the data lines are swapped, a data lin...

17 years ago
Forum
DMX
Reply
RE: Henne's transceiver and strobes

Hi, I had a small tutorial in the (german) pa-forum. The project was to build a DMX-interface for analogue strobes (0/10V) based on the transceiver. ...

17 years ago
Forum
DMX
Reply
RE: Building Henne's transceiver

The settings are saved (non-volatile) in the internal EEPROM. They can be changed at least 10k times.

17 years ago
Forum
DMX
Reply
RE: Building Henne's transceiver

The transceiver firmwares should accept every DMX signal that follows ANSI E1.11. So if the ENTTEC clone transmits DMX, it should work. (Otherwise th...

18 years ago
Forum
DMX
Reply
RE: Henne's DMX transceiver code

It is easy to let a stepper spin at slow speeds. The problem is a smooth accelaration of multiple axes with one mcu... @MacTommy: I wrote a firmware...

18 years ago
Forum
DMX
Reply
RE: Henne's DMX transceiver code

Hi, let me say first: Each firmware has it's own sources. So you can't drive steppers with the DMX reception library (which is quite obvious btw...)...

18 years ago
Forum
DMX
Reply
RE: Building Henne's transceiver

I'm glad you like it 🙂 I use them with a SmartFade others prefer the Light-Commander... BTW: If someone likes to sell the transceiver in the US, pl...

18 years ago
Forum
DMX
Reply
RE: Building Henne's transceiver

Hi, forget C3 and C4. I have to update the english BOM... R1 is a lin. 10k trimmer poti (PIHER PT10-S). (Unlike you build the dimmer or switch pack:...

18 years ago
Forum
DMX
Reply
RE: DMX analyzer

@matt: Can you post a quick overview of the features of the elektor analyzer? (There might be some features, I forgot in my own analyzer fw ;)) Thank...

18 years ago
Forum
DMX
Reply
RE: Combing DMX With Non DMX.....

The power unit seems to work as an analogue switch pack. If a channel can be switched with 5V connected to an input pin, you could "DMXify" the pack ...

18 years ago
Forum
DMX
Reply
RE: RDM with Open DMX dongle

That would be great :p RDM would be possible! Firmware Updates via DMX would be possible! Secure DMX extensions would make pyro and LN2 FX possible! ...

18 years ago
Forum
DMX
Page 1 / 2