Activity
 
Notifications
Clear all
Entropy
@entropy
Honorable Member
Joined: Dec 24, 2007
Topics: 8 / Replies: 589
Reply
RE: RGB Pixel Nodes over Ethernet - New Design

I think the A6281 does have potential as a "module controller" for RGB elements sized somewhere between "pixel strands" (WS2801 seems to be optimal he...

16 years ago
Forum
Reply
RE: AVR Based LED-Strobes

P. Short wrote:With an external oscillator the PICs have no trouble with handling DMX reception and eight-channel dimming simultaneously. Where it ge...

16 years ago
Reply
RE: 40W RGB DMX Reciever Controller.. PLEASE HELP A NEWBIE !

Search is indeed broken - we tend not to be too big on the "use search" flames here. However, the current requirements for such high-power LEDs makes...

16 years ago
Forum
DMX
Reply
RE: You ready yet?

Design some display hardware, build said hardware, test said hardware... And hunt for a house at the same time. My guess is like 2010, my 2011 displ...

16 years ago
Forum
Reply
RE: AVR Based LED-Strobes

Sounds from his description that he is using the ADC values not as the random number itself (floating pin is likely to not be *that* white in terms of...

16 years ago
Reply
RE: RGB LED's Now Consumer Grade - Hackable?

jerrymac wrote:I have a set of the Gemmy Lights that I once lost the remote for, but fortuniatly found later. How difficult or technical would it be ...

16 years ago
Reply
RE: AVR Based LED-Strobes

Yeah, for a strobe you might be able to gain around 50 cents, I've seen PICs in the 50 cent range that might be sufficient if you are just trying to b...

16 years ago
Reply
RE: Does anyone have experience with cell phone repeater products?

Since cell phone signals are line of sight, there is a possibility that even if your service is bad outside your house at ground level, it might be go...

16 years ago
Reply
RE: AVR Based LED-Strobes

kychristmas wrote:I'm curious, are the AVR Micros as cheap as the PICs? Is it that much easy to code for? Starting to get into "holy war" territor...

16 years ago
Reply
RE: RGB Pixel Nodes over Ethernet - New Design

David_AVD wrote:Well, all I can say is that when I spoke to the actual Philips licensing guy, he made it very clear that the patents for PWM + colour ...

16 years ago
Forum
Reply
RE: RGB Pixel Nodes over Ethernet - New Design

ErnieHorning wrote:This is only an issue if you are going to sell something you make that does the same as a patent. If you make it for personal use,...

16 years ago
Forum
Reply
RE: RGB Pixel Nodes over Ethernet - New Design

secanell wrote:Ok, So looking at the comments, and the feedback that I've received, aside from patents, I've decided to go with the following: * Ethe...

16 years ago
Forum
Reply
RE: RGB Pixel Nodes over Ethernet - New Design

David_AVD wrote:Ah, it seems we're talking about totally patents here. The I2C patents and the PWM + Colour Mixing patents are quite separate issues....

16 years ago
Forum
Reply
RE: Help reverse Engineer my display - Step 1 - Controllers

smoothice wrote:Which is cheaper? To build a system with 1 controller and a ton of extension cord or a system with many controllers and less extension...

16 years ago
Reply
RE: Mighty Mini vs the Rainbow floods.

I think that Frank had some stuff come up in RL (such as work blocking DIYC + his laptop breaking) around when the Mighty Mini was at its peak. I'll ...

16 years ago
Forum
Page 7 / 40
Share: