Not sure how it is done in Vixen 3 but this is how you do it in Vixen 2. In regards to baud rate, DMX uses a much faster and non-standard speed but I...
Thanks!
ukewarrior wrote:So, you could build your own with an FTDI converter and some minor parts with a RS485 transceiver chip? Cool. I wonder if this circu...
ukewarrior wrote:Is the hardware nothing more than an FTDI converter? Yes it's got and RS485 transceiver too, look here:
This is the same thing as the Enttec OpenDMX dongle, which uses the FTDI chipset. Many years ago I built my own dongle that was similar, I think I pai...
0 is reserved for special purposes in some cases. Besides that most "normal" people start counting at 1 which is why the spec was designed the way it ...
I've been concocting my Christmas display for several years and the key element is 3 screens in the yard. To do this with three projectors is cost pro...
Technician wrote:Just want to verify the last dimmer on the DMX line has a termination resistor of 120 ohms between the Data + and Data -. Correct. ...
jchuchla wrote:Haven't seen you around in a while Ben. Good to see you back. Thanks, I'm always around. The community has really come up to speed o...
RobertB wrote:Not quite daisy chained, but almost with those particular elements. Just dmx + and - is used. Fair enough but don't forget that daisy ...
DMX is a pretty resilient protocol I would suggest something much simpler. You have Data +, Data -, and Shield lift the shield at all the end points (...
joker80 wrote:Anybody have a clue what this is??? This is likely a better question for the LOR portion of the forum or the creator.
Re: Starting Over btallon wrote:Indeed. Apologies for the wrong forum. Move related posted to other hardware. Carry on.
