Activity
 
Notifications
Clear all
dcamron
@dcamron
Reputable Member
Joined: Jan 12, 2017
Topics: 25 / Replies: 274
Reply
RE: 2019 Display Additions.....

Adding 8 pixel mini trees Going from 16 strands on pixel tree to 20 New pixabulb frames for the windows New tree topper and base to replace the HC one...

8 years ago
Forum
Reply
RE: Which profile is better?

I've had a 180 tree for quite a few years. Last year I doubled the lights and for some reason 180 doesn't look good anymore. The tree is taller and mo...

8 years ago
Forum
Reply
RE: Combined Wire Gauge Effectiveness

I have no problem doing this with stranded wire but solid core can be risky. A 20 gauge wire can break easily, especially at the point where it’s cri...

8 years ago
Reply
RE: 5 volt matrix build problem, very confused... need advice

MartinMueller2003 wrote:The falicy in tying the V- together at the PSU is that the Data is "with respect to ground" AT the PIXEL. The "potential" on V...

8 years ago
Reply
RE: 5 volt matrix build problem, very confused... need advice

mister softee wrote:Each 540 nodes section has 4 pwr injection points, 1 at top,1 at bottom and 2 in the middle,using 16awg landscape wire. Each 540 n...

8 years ago
Reply
RE: cable sliding out

AJR214 wrote:Speaking of soldering, would I want to tin the strands before putting on the ferrules? I'm thinking not, but just want to know if others ...

8 years ago
Reply
RE: Mega tree against the house

I would bend a piece of sheet metal to make a hook over the window opening and use that to anchor the top. To further your decision, use a piece of h...

8 years ago
Forum
Reply
RE: cable sliding out

jnealand wrote:I like the concept of the bootlace crimper but I've always wondered about fitting three wires into the euro connectors side by side. E...

8 years ago
Reply
RE: 2019 January Pre-Sale!

I decided to go ahead and place my order but now it says the connector caps are out of stock. Are these an in-stock only item or a pre-sale item? Er...

8 years ago
Reply
RE: 2019 January Pre-Sale!

tjetzer wrote:There was an error made in the calculation for the cost of some of the connectors and wiring items which is why some of the prices had t...

8 years ago
Reply
RE: 2019 January Pre-Sale!

Why have prices on so many things gone up since the pre-sale started? I created a spreadsheet with prices, quantities, etc when the pre-sale started....

8 years ago
Reply
RE: Failure Analysis

blantrip wrote:I have used Pixabulbs for years with constant failures and need for pixel repairs. I've never had a pixabulb failure but did see qui...

8 years ago
Reply
RE: building a mega tree any suggestions

AJVenti wrote:Sorry if I offended anybody LOL. I wasn’t asking how to build a Mega Tree (pixel tree). I was just looking for some guidance on a poss...

8 years ago
Forum
Reply
RE: JBoards: ESPixNode, Power Distro, Differential sender/receivers and more

jeremy0203 wrote:Nope horizontal. My supplier is seeing if they can source a connector with straight pins. If they can I could get some of those and m...

8 years ago
Reply
RE: building a mega tree any suggestions

rdj6107 wrote: without sounding to snobby, to use the word MEGA and TREE in the same sentence, the tree would need to be 12ft or higher. perhaps a 10...

8 years ago
Forum
Page 3 / 20
Share: